lineage/android_vendor_samsung_mondrianwifi
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Fix wifi issue.

Browse source
This commit is contained in:
Valera 2016-03-08 17:52:55 +03:00
parent 256bdac0d9
commit d43550c14a
1 changed files with 151 additions and 377 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

316
proprietary/etc/wifi/WCNSS_qcom_cfg.ini
View file

@ -1,377 +1,151 @@
# This file allows user to override the factory # This file allows user to override the factory
# defaults for the WLAN Driver # defaults for the WLAN Driver
# Enable IMPS or not # Enable IMPS or not
gEnableImps=1 gEnableImps=1
# Enable/Disable Idle Scan # Enable/Disable Idle Scan
gEnableIdleScan=0 gEnableIdleScan=0
# Increase sleep duration (seconds) during IMPS # Increase sleep duration (seconds) during IMPS
# 0 implies no periodic wake up from IMPS. Periodic wakeup is # 0 implies no periodic wake up from IMPS. Periodic wakeup is
# unnecessary if Idle Scan is disabled. # unnecessary if Idle Scan is disabled.
gImpsModSleepTime=0 gImpsModSleepTime=0
# Enable BMPS or not # Enable BMPS or not
gEnableBmps=1 gEnableBmps=1
# Enable Close Loop or not
gEnableCloseLoop=1
# Enable suspend or not # Enable suspend or not
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter # 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
gEnableSuspend=3 gEnableSuspend=3
# Phy Mode (auto, b, g, n, etc) # Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
gDot11Mode=0 gDot11Mode=0
# Handoff Enable(1) Disable(0)
gEnableHandoff=0
# CSR Roaming Enable(1) Disable(0) # CSR Roaming Enable(1) Disable(0)
gRoamingTime=0 gRoamingTime=0
# Assigned MAC Addresses - This will be used until NV items are in place # Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX # Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC Intf3MacAddress=000AF58989FC
# UAPSD service interval for VO,VI, BE, BK traffic # UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0 InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0 InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0 InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0 InfraUapsdBkSrvIntv=0
# Disable RSSI FW filtering
# Flag to allow STA send AddTspec even when ACM is Off gEnableFWRssiMonitoring=0
gAddTSWhenACMIsOff=1
# Make 1x1 the default antenna configuration # Make 1x1 the default antenna configuration
gNumRxAnt=1 gNumRxAnt=1
# Beacon filtering frequency (unit in beacon intervals) # Beacon filtering frequency (unit in beacon intervals)
gNthBeaconFilter=50 gNthBeaconFilter=50
# Enable WAPI or not # Enable WAPI or not
# WAPIIsEnabled=0 # WAPIIsEnabled=0
# Flags to filter Mcast abd Bcast RX packets. # Flags to filter Mcast abd Bcast RX packets.
# Value 0: No filtering, 1: Filter all Multicast. # Value 0: No filtering, 1: Filter all Multicast.
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast # 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3 McastBcastFilter=3
#Flag to enable HostARPOffload feature or not #Flag to enable HostARPOffload feature or not
hostArpOffload=0
hostArpOffload=1
#SoftAP Related Parameters #SoftAP Related Parameters
# AP MAc addr # AP MAc addr
gAPMacAddr=000AF58989EF
gAPMacAddr=000AF589dcab
# 802.11n Protection flag # 802.11n Protection flag
gEnableApProt=1 gEnableApProt=1
#Enable OBSS protection #Enable OBSS protection
gEnableApOBSSProt=0
gEnableApOBSSProt=1
#Enable/Disable UAPSD for SoftAP #Enable/Disable UAPSD for SoftAP
gEnableApUapsd=1 gEnableApUapsd=1
# Fixed Rate # Fixed Rate
gFixedRate=0 gFixedRate=0
# Maximum Tx power # Maximum Tx power
# gTxPowerCap=30 # gTxPowerCap=30
# Fragmentation Threshold # Fragmentation Threshold
# gFragmentationThreshold=2346 # gFragmentationThreshold=2346
# RTS threshold # RTS threshold
RTSThreshold=2347 RTSThreshold=2347
# Intra-BSS forward # Intra-BSS forward
gDisableIntraBssFwd=0 gDisableIntraBssFwd=0
# WMM Enable/Disable # WMM Enable/Disable
WmmIsEnabled=0 WmmIsEnabled=0
# 802.11d support # 802.11d support
g11dSupportEnabled=1 g11dSupportEnabled=1
# CCX Support and fast transition # CCX Support and fast transition
CcxEnabled=0 CcxEnabled=0
FastTransitionEnabled=1 FastTransitionEnabled=0
ImplicitQosIsEnabled=0 ImplicitQosIsEnabled=1
gNeighborScanTimerPeriod=200 gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=50
gNeighborReassocThreshold=55
gNeighborScanChannelList=1,11,36,64
gNeighborScanChannelMinTime=20 gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30 gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-CCX, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0
FastRoamEnabled=1
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
#the RSSI of the new/roamable AP should be for roaming
RoamRssiDiff=5
# SAP Country code # SAP Country code
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door. # Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
# Example # Example
# US Indoor, USI # US Indoor, USI
# Korea Outdoor, KRO # Korea Outdoor, KRO
# Japan without optional byte, JP # Japan without optional byte, JP
# France without optional byte, FR # France without optional byte, FR
#gAPCntryCode=USI #gAPCntryCode=USI
#Short Guard Interval Enable/disable #Short Guard Interval Enable/disable
gShortGI20Mhz=1 gShortGI20Mhz=1
gShortGI40Mhz=1 gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled #Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0 gAPAutoShutOff=0
# SAP auto channel selection configuration # SAP auto channel selection configuration
# 0 = disable auto channel selection # 0 = disable auto channel selection
# 1 = enable auto channel selection, channel provided by supplicant will be ignored # 1 = enable auto channel selection, channel provided by supplicant will be ignored
gApAutoChannelSelection=0
gApAutoChannelSelection=1
# Listen Energy Detect Mode Configuration # Listen Energy Detect Mode Configuration
# Valid values 0-128 # Valid values 0-128
# 128 means disable Energy Detect feature # 128 means disable Energy Detect feature
# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled. # 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
# 10-128 are reserved. # 10-128 are reserved.
# The EDET threshold mapping is as follows in 3dB step: # The EDET threshold mapping is as follows in 3dB step:
# 0 = -60 dBm # 0 = -60 dBm
# 1 = -63 dBm # 1 = -63 dBm
# 2 = -66 dBm # 2 = -66 dBm
# ... # ...
# 7 = -81 dBm # 7 = -81 dBm
# 8 = -84 dBm # 8 = -84 dBm
# 9 = -87 dBm # 9 = -87 dBm
# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as: # Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
# #
# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm. # Range Loss (dB) = EDET threshold level (dBm) + 97 dBm.
# #
gEnablePhyAgcListenMode=128 gEnablePhyAgcListenMode=128
#Preferred channel to start BT AMP AP mode (0 means, any channel)
BtAmpPreferredChannel=0
#Preferred band (both or 2.4 only or 5 only) #Preferred band (both or 2.4 only or 5 only)
BandCapability=0 BandCapability=0
#Forced Device Listen Interval in multiples of DTIM Period aligned to DTIM
#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
enableBeaconEarlyTermination=1
beaconEarlyTerminationWakeInterval=11
#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
gEnableBtAmp=0
#SOFTAP Channel Range selection
gAPChannelSelectStartChannel=1
gAPChannelSelectEndChannel=11
#SOFTAP Channel Range selection Operating band
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
gAPChannelSelectOperatingBand=0
#Channel Bonding
gChannelBondingMode5GHz=1
#Enable Keep alive with non-zero period value
gStaKeepAlivePeriod=30
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
#For every 10 seconds DUT sends Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
#For both active and power save clients.
#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
#If doesn't honor for 5 seconds then Driver remove client.
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still DUT try on
#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod +gGoLinkMonitorPeriod)..
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
#where we send NULL frame.
#gApLinkMonitorPeriod = 10
#gGoLinkMonitorPeriod = 10
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
gGoKeepAlivePeriod = 30
gApKeepAlivePeriod = 10
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
#gEnableBypass11d=1
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1
gVhtChannelWidth=2
gEnableLogp=1
# Enable Automatic Tx Power control
gEnableAutomaticTxPowerControl=1
# 0 for OLPC 1 for CLPC and SCPC
gEnableCloseLoop=1
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
# VHT Tx/Rx MCS values
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gVhtRxMCS=2
gVhtTxMCS=2
gEnableLpwrImgTransition=1
# Enable Tx beamforming
gTxBFEnable=1
# Enable Tx LDPC
#gTxLdpcEnable = 1 for HT mode, 2 for VHT mode,3 for both HT and VHT
gTxLdpcEnable=3
#FlexConnect Power Factor
#Default is set to 0 (disable)
gFlexConnectPowerFactor=0
# Valid values are 2048,4096,8192 and so on
# Please don't use values other than the ones mentioned above
gMaxMediumTime=4096
# 802.11K support
gRrmEnable=1
gRrmOperChanMax=8
gRrmNonOperChanMax=8
gRrmRandIntvl=100
#Enable/Disable Modulated DTIM feature
gEnableModulatedDTIM=3 gEnableModulatedDTIM=3
#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
#max LI value for modulated DTIM enableBeaconEarlyTermination=1
gMaxLIModulatedDTIM=3 beaconEarlyTerminationWakeInterval=11
#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
gEnableBtAmp=0
#Preferred channel to start BT AMP AP mode (0 means, any channel)
BtAmpPreferredChannel=0
#SOFTAP Channel Range selection
gAPChannelSelectStartChannel=1
gAPChannelSelectEndChannel=11
#SOFTAP Channel Range selection Operating band
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
gAPChannelSelectOperatingBand=0
#Enable Keep alive with non-zero period value
gStaKeepAlivePeriod = 25
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=0
# Enable logp/SSR
gEnableLogp=1
# Disable HT40
gChannelBondingMode5GHz=0
# Enable Automatic Tx Power control
gEnableAutomaticTxPowerControl=1
# Derive P2P MAC address from primary MAC address
isP2pDeviceAddrAdministrated=1
END END
# Note: Configuration parser would not read anything past the END marker # Note: Configuration parser would not read anything past the END marker