helm-charts/charts/library/common/values.yaml

---
global:
  # -- Set an override for the prefix of the fullname
  nameOverride:
  # -- Set the entire name definition
  fullnameOverride:
  # -- Set additional global labels. Helm templates can be used.
  labels: {}
  # -- Set additional global annotations. Helm templates can be used.
  annotations: {}

# -- Set default options for all controllers / pods here
# Each of these options can be overridden on a Pod level
defaultPodOptions:
  # -- Defines affinity constraint rules.
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity)
  affinity: {}

  # -- Set annotations on the Pod. Pod-specific values will be merged with this.
  annotations: {}

  # -- Specifies whether a service account token should be automatically mounted.
  automountServiceAccountToken: true

  # -- Configuring the ndots option may resolve nslookup issues on some Kubernetes setups.
  dnsConfig:
    {}
    # options:
    #   - name: ndots
    #     value: "1"

  # -- Defaults to "ClusterFirst" if hostNetwork is false
  # and "ClusterFirstWithHostNet" if hostNetwork is true.
  dnsPolicy: # ClusterFirst

  # -- Enable/disable the generation of environment variables for services.
  # [[ref]](https://kubernetes.io/docs/concepts/services-networking/connect-applications-service/#accessing-the-service)
  enableServiceLinks: true

  # -- Allows specifying explicit hostname setting
  hostname:

  # -- Use hostAliases to add custom entries to /etc/hosts - mapping IP addresses to hostnames.
  # [[ref]](https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/)
  hostAliases: []
  # - ip: "192.168.1.100"
  #   hostnames:
  #   - "example.com"
  #   - "www.example.com"

  # -- Use the host's ipc namespace
  hostIPC: false

  # -- When using hostNetwork make sure you set dnsPolicy to `ClusterFirstWithHostNet`
  hostNetwork: false

  # -- Use the host's pid namespace
  hostPID: false

  # -- Set image pull secrets
  imagePullSecrets: []

  # -- Set labels on the Pod. Pod-specific values will be merged with this.
  labels: {}

  # -- Node selection constraint
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodeselector)
  nodeSelector: {}

  # -- Custom priority class for different treatment by the scheduler
  priorityClassName: # system-node-critical

  # -- Set Container restart policy.
  # @default -- `Always`. When `controller.type` is `cronjob` it defaults to `Never`.
  restartPolicy:

  # -- Allow specifying a runtimeClassName other than the default one (ie: nvidia)
  runtimeClassName: # nvidia

  # -- Allows specifying a custom scheduler name
  schedulerName: # awkward-dangerous-scheduler

  # -- Configure the Security Context for the Pod
  securityContext: {}

  # -- Duration in seconds the pod needs to terminate gracefully
  # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle)]
  terminationGracePeriodSeconds:

  # -- Specify taint tolerations
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration/)
  tolerations: []

  # -- Defines topologySpreadConstraint rules.
  # [[ref]](https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/)
  topologySpreadConstraints: []
  # - maxSkew: <integer>
  #   topologyKey: <string>
  #   whenUnsatisfiable: <string>
  #   labelSelector: <object>

controllers:
  main:
    # -- enable the controller.
    enabled: true

    # -- Set the controller type.
    # Valid options are deployment, daemonset, statefulset or cronjob
    type: deployment
    # -- Set annotations on the deployment/statefulset/daemonset/cronjob
    annotations: {}
    # -- Set labels on the deployment/statefulset/daemonset/cronjob
    labels: {}
    # -- Number of desired pods. When using a HorizontalPodAutoscaler, set this to `null`.
    replicas: 1
    # -- Set the controller upgrade strategy
    # For Deployments, valid values are Recreate (default) and RollingUpdate.
    # For StatefulSets, valid values are OnDelete and RollingUpdate (default).
    # DaemonSets/CronJobs ignore this.
    strategy:

    rollingUpdate:
      # -- Set deployment RollingUpdate max unavailable
      unavailable:
      # -- Set deployment RollingUpdate max surge
      surge:
      # -- Set statefulset RollingUpdate partition
      partition:
    # -- ReplicaSet revision history limit
    revisionHistoryLimit: 3

    # -- CronJob configuration. Required only when using `controller.type: cronjob`.
    # @default -- See below
    cronjob:
      # -- Specifies how to treat concurrent executions of a job that is created by this cron job
      # valid values are Allow, Forbid or Replace
      concurrencyPolicy: Forbid
      # -- Sets the CronJob time when to execute your jobs
      schedule: "*/20 * * * *"
      # -- The deadline in seconds for starting the job if it misses its scheduled time for any reason
      startingDeadlineSeconds: 30
      # -- The number of succesful Jobs to keep
      successfulJobsHistory: 1
      # -- The number of failed Jobs to keep
      failedJobsHistory: 1
      # --  If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to
      # be automatically deleted.
      ttlSecondsAfterFinished:
      # -- Limits the number of times a failed job will be retried
      backoffLimit: 6

    # -- StatefulSet configuration. Required only when using `controller.type: statefulset`.
    statefulset:
      # -- Set podManagementPolicy, valid values are Parallel and OrderedReady (default).
      podManagementPolicy:

      # -- Used to create individual disks for each instance.
      volumeClaimTemplates: []
      # - name: data
      #   labels: {}
      #   annotations: {}
      #   mountPath: /data
      #   accessMode: "ReadWriteOnce"
      #   size: 1Gi
      # - name: backup
      #   labels: {}
      #   annotations: {}
      #   mountPath: /backup
      #   subPath: theSubPath
      #   accessMode: "ReadWriteOnce"
      #   size: 2Gi
      #   storageClass: cheap-storage-class

    containers:
      main:
        # -- Override the container name
        nameOverride:

        # -- Override the default container order
        # Containers get sorted alphanumerically by the `<order>-<identifier>` combination.
        # @default -- 99
        order: 1

        image:
          # -- image repository
          repository:
          # -- image tag
          tag:
          # -- image pull policy
          pullPolicy:

        # -- Override the command(s) for the default container
        command: []
        # -- Override the args for the default container
        args: []

        # -- Environment variables. Template enabled.
        # Syntax options:
        # A) TZ: UTC
        # B) PASSWD: '{{ .Release.Name }}'
        # C) PASSWD:
        #      configMapKeyRef:
        #        name: config-map-name
        #        key: key-name
        # D) PASSWD:
        #      valueFrom:
        #        secretKeyRef:
        #          name: secret-name
        #          key: key-name
        #      ...
        # E) - name: TZ
        #      value: UTC
        # F) - name: TZ
        #      value: '{{ .Release.Name }}'
        env:

        # -- Secrets and/or ConfigMaps that will be loaded as environment variables.
        # [[ref]](https://unofficial-kubernetes.readthedocs.io/en/latest/tasks/configure-pod-container/configmap/#use-case-consume-configmap-in-environment-variables)
        envFrom: []
        # - configMapRef:
        #     name: config-map-name
        # - secretRef:
        #     name: secret-name

        # -- Probe configuration
        # -- [[ref]](https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/)
        # @default -- See below
        probes:
          # -- Liveness probe configuration
          # @default -- See below
          liveness:
            # -- Enable the liveness probe
            enabled: true
            # -- Set this to `true` if you wish to specify your own livenessProbe
            custom: false
            # -- sets the probe type when not using a custom probe
            # @default -- "TCP"
            type: TCP
            # -- The spec field contains the values for the default livenessProbe.
            # If you selected `custom: true`, this field holds the definition of the livenessProbe.
            # @default -- See below
            spec:
              initialDelaySeconds: 0
              periodSeconds: 10
              timeoutSeconds: 1
              failureThreshold: 3

          # -- Redainess probe configuration
          # @default -- See below
          readiness:
            # -- Enable the readiness probe
            enabled: true
            # -- Set this to `true` if you wish to specify your own readinessProbe
            custom: false
            # -- sets the probe type when not using a custom probe
            # @default -- "TCP"
            type: TCP
            # -- The spec field contains the values for the default readinessProbe.
            # If you selected `custom: true`, this field holds the definition of the readinessProbe.
            # @default -- See below
            spec:
              initialDelaySeconds: 0
              periodSeconds: 10
              timeoutSeconds: 1
              failureThreshold: 3

          # -- Startup probe configuration
          # @default -- See below
          startup:
            # -- Enable the startup probe
            enabled: true
            # -- Set this to `true` if you wish to specify your own startupProbe
            custom: false
            # -- sets the probe type when not using a custom probe
            # @default -- "TCP"
            type: TCP
            # -- The spec field contains the values for the default startupProbe.
            # If you selected `custom: true`, this field holds the definition of the startupProbe.
            # @default -- See below
            spec:
              initialDelaySeconds: 0
              timeoutSeconds: 1
              ## This means it has a maximum of 5*30=150 seconds to start up before it fails
              periodSeconds: 5
              failureThreshold: 30

        # -- Set the resource requests / limits for the container.
        resources:
          {}
          ## We usually recommend not to specify default resources and to leave this as a conscious
          ## choice for the user. This also increases chances charts run on environments with little
          ## resources, such as Minikube. If you do want to specify resources, uncomment the following
          ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
          # limits:
          #   cpu: 100m
          #   memory: 128Mi
          # requests:
          #   cpu: 100m
          #   memory: 128Mi

        # -- Configure the Security Context for the container
        securityContext: {}

        # -- Configure the lifecycle for the container
        lifecycle: {}

        # -- Configure the path at which the file to which the containers termination message will be written.
        # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
        terminationMessagePath:

        # -- Indicate how the containers termination message should be populated.
        # Valid options are `File` and `FallbackToLogsOnError`.
        # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
        terminationMessagePolicy:

    # -- Specify any initContainers here as dictionary items.
    # Each initContainer should have its own key
    # initContainers get sorted alphanumerically by the `<order>-<identifier>` combination.
    initContainers: {}

serviceAccount:
  # -- Specifies whether a service account should be created
  create: false

  # -- Annotations to add to the service account
  annotations: {}

  # -- Labels to add to the service account
  labels: {}

  # -- The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""

# -- Use this to populate secrets with the values you specify.
# Be aware that these values are not encrypted by default, and could therefore visible
# to anybody with access to the values.yaml file.
# Additional Secrets can be added by adding a dictionary key similar to the 'secret' object.
# @default -- See below
secrets:
  secret:
    # -- Enables or disables the Secret
    enabled: false
    # -- Labels to add to the Secret
    labels: {}
    # -- Annotations to add to the Secret
    annotations: {}
    # -- Secret stringData content. Helm template enabled.
    stringData:
      {}
      # foo: bar

# -- Configure configMaps for the chart here.
# Additional configMaps can be added by adding a dictionary key similar to the 'config' object.
# @default -- See below
configMaps:
  config:
    # -- Enables or disables the configMap
    enabled: false
    # -- Labels to add to the configMap
    labels: {}
    # -- Annotations to add to the configMap
    annotations: {}
    # -- configMap data content. Helm template enabled.
    data:
      {}
      # foo: bar

# -- Configure the services for the chart here.
# Additional services can be added by adding a dictionary key similar to the 'main' service.
# @default -- See below
service:
  main:
    # -- Enables or disables the service
    enabled: true

    # -- Override the name suffix that is used for this service
    nameOverride:

    # -- Configure which controller this service should target
    controller: main

    # -- Make this the primary service for this controller (used in probes, notes, etc...).
    # If there is more than 1 service targeting the controller, make sure that only 1 service is
    # marked as primary.
    primary: true

    # -- Set the service type
    type: ClusterIP

    # -- Specify the externalTrafficPolicy for the service. Options: Cluster, Local
    # -- [[ref](https://kubernetes.io/docs/tutorials/services/source-ip/)]
    externalTrafficPolicy:

    # -- Specify the ip policy. Options: SingleStack, PreferDualStack, RequireDualStack
    ipFamilyPolicy:
    # -- The ip families that should be used. Options: IPv4, IPv6
    ipFamilies: []

    # -- Provide additional annotations which may be required.
    annotations: {}

    # -- Provide additional labels which may be required.
    labels: {}

    # -- Allow adding additional match labels
    extraSelectorLabels: {}

    # -- Configure the Service port information here.
    # Additional ports can be added by adding a dictionary key similar to the 'http' service.
    # @default -- See below
    ports:
      http:
        # -- Enables or disables the port
        enabled: true

        # -- Make this the primary port (used in probes, notes, etc...)
        # If there is more than 1 service, make sure that only 1 port is marked as primary.
        primary: true

        # -- The port number
        port:

        # -- Port protocol.
        # Support values are `HTTP`, `HTTPS`, `TCP` and `UDP`.
        # HTTP and HTTPS spawn a TCP service and get used for internal URL and name generation
        protocol: HTTP

        # -- Specify a service targetPort if you wish to differ the service port from the application port.
        # If `targetPort` is specified, this port number is used in the container definition instead of
        # the `port` value. Therefore named ports are not supported for this field.
        targetPort:

        # -- Specify the nodePort value for the LoadBalancer and NodePort service types.
        # [[ref]](https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport)
        nodePort:

# -- Configure the ServiceMonitors for the chart here.
# Additional ServiceMonitors can be added by adding a dictionary key similar to the 'main' ServiceMonitors.
# @default -- See below
serviceMonitor:
  main:
    # -- Enables or disables the serviceMonitor.
    enabled: false

    # -- Override the name suffix that is used for this serviceMonitor.
    nameOverride:

    # -- Provide additional annotations which may be required.
    annotations: {}

    # -- Provide additional labels which may be required.
    labels: {}

    # -- Configures a custom selector for the serviceMonitor, this takes precedence over
    # specifying a service name.
    # Helm templates can be used.
    selector: {}

    # -- Configures the target Service for the serviceMonitor. Helm templates can be used.
    serviceName: '{{ include "bjw-s.common.lib.chart.names.fullname" $ }}'

    # -- Configures the endpoints for the serviceMonitor.
    # @default -- See values.yaml
    endpoints:
      - port: http
        scheme: http
        path: /metrics
        interval: 1m
        scrapeTimeout: 10s

# -- Configure the ingresses for the chart here.
# Additional ingresses can be added by adding a dictionary key similar to the 'main' ingress.
# @default -- See below
ingress:
  main:
    # -- Enables or disables the ingress
    enabled: false

    # -- Make this the primary ingress (used in probes, notes, etc...).
    # If there is more than 1 ingress, make sure that only 1 ingress is marked as primary.
    primary: true

    # -- Override the name suffix that is used for this ingress.
    nameOverride:

    # -- Provide additional annotations which may be required.
    annotations:
      {}
      # kubernetes.io/ingress.class: nginx
      # kubernetes.io/tls-acme: "true"

    # -- Provide additional labels which may be required.
    labels: {}

    # -- Set the ingressClass that is used for this ingress.
    className: # "nginx"

    ## Configure the hosts for the ingress
    hosts:
      - # -- Host address. Helm template can be passed.
        host: chart-example.local
        ## Configure the paths for the host
        paths:
          - # -- Path.  Helm template can be passed.
            path: /
            pathType: Prefix
            service:
              # -- Overrides the service name reference for this path
              # This can be an actual service name, or reference a service identifier
              # from this values.yaml
              name: main
              # -- Overrides the service port number reference for this path
              port:

    # -- Configure TLS for the ingress. Both secretName and hosts can process a Helm template.
    tls: []
    #  - secretName: chart-example-tls
    #    hosts:
    #      - chart-example.local

# -- Configure the gateway routes for the chart here.
# Additional routes can be added by adding a dictionary key similar to the 'main' route.
# [[ref]](https://gateway-api.sigs.k8s.io/references/spec/#gateway.networking.k8s.io%2fv1alpha2)
# @default -- See below
route:
  main:
    # -- Enables or disables the route
    enabled: false

    # -- Set the route kind
    # Valid options are GRPCRoute, HTTPRoute, TCPRoute, TLSRoute, UDPRoute
    kind: HTTPRoute

    # -- Override the name suffix that is used for this route.
    nameOverride:

    # -- Provide additional annotations which may be required.
    annotations: {}

    # -- Provide additional labels which may be required.
    labels: {}

    # -- Configure the resource the route attaches to.
    parentRefs:
      - # Group of the referent resource.
        group: gateway.networking.k8s.io
        # Kind of the referent resource.
        kind: Gateway
        # Name of the referent resource
        name:
        # Namespace of the referent resource
        namespace:
        # Name of the section within the target resource.
        sectionName:

    # -- Host addresses
    hostnames: []

    # -- Configure rules for routing. Defaults to the primary service.
    rules:
      - # -- Configure backends where matching requests should be sent.
        backendRefs:
          - group: ""
            kind: Service
            name: main
            namespace:
            port:
            weight: 1
        ## Configure conditions used for matching incoming requests. Only for HTTPRoutes
        matches:
          - path:
              type: PathPrefix
              value: /

# -- Configure persistence for the chart here.
# Additional items can be added by adding a dictionary key similar to the 'config' key.
# [[ref]](https://bjw-s.github.io/helm-charts/docs/common-library/common-library-storage)
# @default -- See below
persistence:
  config:
    # -- Enables or disables the persistence item. Defaults to true
    enabled: false

    # -- Sets the persistence type
    # Valid options are persistentVolumeClaim, emptyDir, hostPath, secret, configMap or custom
    type: persistentVolumeClaim

    # -- Storage Class for the config volume.
    # If set to `-`, dynamic provisioning is disabled.
    # If set to something else, the given storageClass is used.
    # If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner.
    storageClass: # "-"

    # -- If you want to reuse an existing claim, the name of the existing PVC can be passed here.
    existingClaim: # your-claim

    # -- AccessMode for the persistent volume.
    # Make sure to select an access mode that is supported by your storage provider!
    # [[ref]](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#access-modes)
    accessMode: ReadWriteOnce

    # -- The amount of storage that is requested for the persistent volume.
    size: 1Gi

    # -- Set to true to retain the PVC upon `helm uninstall`
    retain: false

    # -- Configure mounts to all controllers and containers. By default the persistence item
    # will be mounted to `/<name_of_the_peristence_item>`.
    # Example:
    # globalMounts:
    #   - path: /config
    #     readOnly: false
    globalMounts: []

    # -- Explicitly configure mounts for specific controllers and containers.
    # Example:
    # advancedMounts:
    #   main: # the controller with whe "main" identifier
    #     main: # the container with whe "main" identifier
    #       - path: /data/config.yaml
    #         readOnly: true
    #         subPath: config.yaml
    #     second-container: # the container with whe "second-container" identifier
    #       - path: /appdata/config
    #         readOnly: true
    #   second-controller: # the controller with whe "second-controller" identifier
    #     main: # the container with whe "main" identifier
    #       - path: /data/config.yaml
    #         readOnly: false
    #         subPath: config.yaml
    advancedMounts: {}

# -- Configure the networkPolicies for the chart here.
# Additional networkPolicies can be added by adding a dictionary key similar to the 'main' networkPolicy.
# @default -- See below
networkpolicies:
  main:
    # -- Enables or disables the networkPolicy item. Defaults to true
    enabled: false

    # -- Configure which controller this networkPolicy should target
    controller: main

    # -- Define a custom podSelector for the networkPolicy. This takes precedence over targeting a controller.
    # podSelector: {}

    # -- The policyTypes for this networkPolicy
    policyTypes:
      - Ingress
      - Egress

    # -- The rulesets for this networkPolicy
    # [[ref]](https://kubernetes.io/docs/concepts/services-networking/network-policies/#networkpolicy-resource)
    rules:
      # -- The ingress rules for this networkPolicy. Allows all ingress traffic by default.
      ingress:
        - {}
      # -- The egress rules for this networkPolicy. Allows all egress traffic by default.
      egress:
        - {}