---
global:
  # -- Set an override for the prefix of the fullname
  nameOverride:
  # -- Set the entire name definition
  fullnameOverride:
  # -- Set additional global labels. Helm templates can be used.
  labels: {}
  # -- Set additional global annotations. Helm templates can be used.
  annotations: {}

# -- Set default options for all controllers / pods here
# Each of these options can be overridden on a Controller level
defaultPodOptions:
  # -- Defines affinity constraint rules.
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#affinity-and-anti-affinity)
  affinity: {}

  # -- Set annotations on the Pod. Pod-specific values will be merged with this.
  annotations: {}

  # -- Specifies whether a service account token should be automatically mounted.
  automountServiceAccountToken: true

  # -- Configuring the ndots option may resolve nslookup issues on some Kubernetes setups.
  dnsConfig: {}

  # -- Defaults to "ClusterFirst" if hostNetwork is false and "ClusterFirstWithHostNet" if hostNetwork is true.
  dnsPolicy: ""

  # -- Enable/disable the generation of environment variables for services.
  # [[ref]](https://kubernetes.io/docs/concepts/services-networking/connect-applications-service/#accessing-the-service)
  enableServiceLinks: false

  # -- Allows specifying explicit hostname setting
  hostname: ""

  # -- Use hostAliases to add custom entries to /etc/hosts - mapping IP addresses to hostnames.
  # [[ref]](https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/)
  hostAliases: []

  # -- Use the host's ipc namespace
  hostIPC: false

  # -- When using hostNetwork make sure you set dnsPolicy to `ClusterFirstWithHostNet`
  hostNetwork: false

  # -- Use the host's pid namespace
  hostPID: false

  # -- Set image pull secrets
  imagePullSecrets: []

  # -- Set labels on the Pod. Pod-specific values will be merged with this.
  labels: {}

  # -- Node selection constraint
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodeselector)
  nodeSelector: {}

  # -- Custom priority class for different treatment by the scheduler
  priorityClassName: ""

  # -- Set Container restart policy.
  # @default -- `Always`. When `controller.type` is `cronjob` it defaults to `Never`.
  restartPolicy: ""

  # -- Allow specifying a runtimeClassName other than the default one (ie: nvidia)
  runtimeClassName: ""

  # -- Allows specifying a custom scheduler name
  schedulerName: ""

  # -- Configure the Security Context for the Pod
  securityContext: {}

  # -- Duration in seconds the pod needs to terminate gracefully
  # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle)]
  terminationGracePeriodSeconds:

  # -- Specify taint tolerations
  # [[ref]](https://kubernetes.io/docs/concepts/scheduling-eviction/taint-and-toleration/)
  tolerations: []

  # -- Defines topologySpreadConstraint rules.
  # [[ref]](https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/)
  topologySpreadConstraints: []

controllers: {}
#   main:
#     # -- enable the controller.
#     enabled: true

#     # -- Set the controller type.
#     # Valid options are deployment, daemonset, statefulset, cronjob or job
#     type: deployment
#     # -- Set annotations on the deployment/statefulset/daemonset/cronjob/job
#     annotations: {}
#     # -- Set labels on the deployment/statefulset/daemonset/cronjob/job
#     labels: {}
#     # -- Number of desired pods. When using a HorizontalPodAutoscaler, set this to `null`.
#     replicas: 1
#     # -- Set the controller upgrade strategy
#     # For Deployments, valid values are Recreate (default) and RollingUpdate.
#     # For StatefulSets, valid values are OnDelete and RollingUpdate (default).
#     # DaemonSets/CronJobs/Jobs ignore this.
#     strategy:

#     rollingUpdate:
#       # -- Set deployment RollingUpdate max unavailable
#       unavailable:
#       # -- Set deployment RollingUpdate max surge
#       surge:
#       # -- Set statefulset RollingUpdate partition
#       partition:
#     # -- ReplicaSet revision history limit
#     revisionHistoryLimit: 3

#     # -- Set the controller service account name
#     # This is entirely optional, if empty or `null` the controller will use the default service account
#     serviceAccount:
#       # -- Only use one of `name` or `identifier`. In case both are specified it will prioritize `identifier`.
#       # -- Reference a service account identifier from this values.yaml
#       identifier:
#       # -- Explicitly set the service account name
#       name:
#     # -- CronJob configuration. Required only when using `controller.type: cronjob`.
#     # @default -- See below
#     cronjob:
#       # -- Suspends the CronJob
#       # [[ref]](https://kubernetes.io/docs/concepts/workloads/controllers/cron-jobs/#schedule-suspension)
#       # @default -- false
#       suspend:
#       # -- Specifies how to treat concurrent executions of a job that is created by this cron job
#       # valid values are Allow, Forbid or Replace
#       concurrencyPolicy: Forbid
#       # -- Sets the CronJob timezone (only works in Kubernetes >= 1.27)
#       timeZone:
#       # -- Sets the CronJob time when to execute your jobs
#       schedule: "*/20 * * * *"
#       # -- The deadline in seconds for starting the job if it misses its scheduled time for any reason
#       startingDeadlineSeconds: 30
#       # -- The number of succesful Jobs to keep
#       successfulJobsHistory: 1
#       # -- The number of failed Jobs to keep
#       failedJobsHistory: 1
#       # -- If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to
#       # be automatically deleted.
#       ttlSecondsAfterFinished:
#       # -- Limits the number of times a failed job will be retried
#       backoffLimit: 6
#       # -- Specify the number of parallel jobs
#       parallelism:

#     # -- Job configuration. Required only when using `controller.type: job`.
#     # @default -- See below
#     job:
#       # -- Suspends the Job
#       # [[ref]](https://kubernetes.io/docs/concepts/workloads/controllers/job/#suspending-a-job)
#       # @default -- false
#       suspend:
#       # -- If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to
#       # be automatically deleted.
#       ttlSecondsAfterFinished:
#       # -- Limits the number of times a failed job will be retried
#       backoffLimit: 6
#       # -- Specify the number of parallel jobs
#       parallelism:
#       # -- Specify the number of completions for the job
#       completions:
#       # -- Specify the completionMode for the job
#       completionMode:

#     # -- StatefulSet configuration. Required only when using `controller.type: statefulset`.
#     statefulset:
#       # -- Set podManagementPolicy, valid values are Parallel and OrderedReady (default).
#       podManagementPolicy:

#       # -- Used to create individual disks for each instance.
#       volumeClaimTemplates: []
#       # - name: data
#       #   labels: {}
#       #   annotations: {}
#       #   globalMounts:
#       #     - path: /data
#       #   accessMode: "ReadWriteOnce"
#       #   dataSourceRef:
#       #     apiGroup: snapshot.storage.k8s.io
#       #     kind: VolumeSnapshot
#       #     name: MySnapshot
#       #   size: 1Gi
#       # - name: backup
#       #   labels: {}
#       #   annotations: {}
#       #   globalMounts:
#       #     - path: /backup
#       #       subPath: theSubPath
#       #   accessMode: "ReadWriteOnce"
#       #   size: 2Gi
#       #   storageClass: cheap-storage-class

#     # Controller-specific overrides for `defaultPodOptions` keys
#     pod: {}

#     # -- Whether to apply defaultContainerOptions to initContainers
#     applyDefaultContainerOptionsToInitContainers: true
#     # -- Set the strategy for the default container options. Defaults to
#     #    overwrite: If container-level options are set, use those instead of the defaults.
#     #    merge: If container-level options are set, merge them with the defaults
#     # @default -- overwrite
#     defaultContainerOptionsStrategy: overwrite
#     # -- Set default options for all (init)Containers here
#     # Each of these options can be overridden on a container level
#     defaultContainerOptions:
#       image:
#         # -- Override the image repository for the containers
#         repository:
#         # -- Override the image tag for the containers
#         tag:
#         # -- Override the image pull policy for the containers
#         pullPolicy:
#       # -- Override the command(s) for the containers
#       command:
#       # -- Override the args for the containers
#       args:
#       # -- Environment variables.
#       env:
#       # -- Secrets and/or ConfigMaps that will be loaded as environment variables.
#       envFrom: {}
#       # -- Set the resource requests / limits for the container.
#       resources:
#       # -- Configure the Security Context for the container
#       securityContext: {}

#     containers:
#       main:
#         # -- Override the container name
#         nameOverride:

#         # -- Specify if this container depends on any other containers
#         # This is used to determine the order in which the containers are rendered.
#         dependsOn: []

#         image:
#           # -- image repository
#           repository:
#           # -- image tag
#           tag:
#           # -- image pull policy
#           pullPolicy:

#         # -- Override the command(s) for the container
#         command: []
#         # -- Override the args for the container
#         args: []
#         # -- Override the working directory for the container
#         workingDir:

#         # -- Environment variables. Template enabled.
#         # Syntax options:
#         # A) TZ: UTC
#         # B) PASSWD: '{{ .Release.Name }}'
#         # B) TZ:
#         #      value: UTC
#         #      dependsOn: otherVar
#         # D) PASSWD:
#         #      configMapKeyRef:
#         #        name: config-map-name
#         #        key: key-name
#         # E) PASSWD:
#         #      dependsOn:
#         #        - otherVar1
#         #        - otherVar2
#         #      valueFrom:
#         #        secretKeyRef:
#         #          name: secret-name
#         #          key: key-name
#         #      ...
#         # F) - name: TZ
#         #      value: UTC
#         # G) - name: TZ
#         #      value: '{{ .Release.Name }}'
#         env:

#         # -- Secrets and/or ConfigMaps that will be loaded as environment variables.
#         # Syntax options:
#         # A) Pass an app-template configMap identifier:
#         #    - config: config
#         # B) Pass any configMap name that is not also an identifier (Template enabled):
#         #    - config: random-configmap-name
#         # C) Pass an app-template configMap identifier, explicit syntax:
#         #    - configMapRef:
#         #        identifier: config
#         # D) Pass any configMap name, explicit syntax (Template enabled):
#         #    - configMapRef:
#         #        name: "{{ .Release.Name }}-config"
#         # E) Pass an app-template secret identifier:
#         #    - secret: secret
#         # F) Pass any secret name that is not also an identifier (Template enabled):
#         #    - secret: random-secret-name
#         # G) Pass an app-template secret identifier, explicit syntax:
#         #    - secretRef:
#         #        identifier: secret
#         # H) Pass any secret name, explicit syntax (Template enabled):
#         #    - secretRef:
#         #        name: "{{ .Release.Name }}-secret"
#         envFrom: []

#         # -- Probe configuration
#         # -- [[ref]](https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/)
#         probes:
#           # -- Liveness probe configuration
#           # @default -- See below
#           liveness:
#             # -- Enable the liveness probe
#             enabled: true
#             # -- Set this to `true` if you wish to specify your own livenessProbe
#             custom: false
#             # -- sets the probe type when not using a custom probe
#             # @default -- "TCP"
#             type: TCP
#             # -- The spec field contains the values for the default livenessProbe.
#             # If you selected `custom: true`, this field holds the definition of the livenessProbe.
#             # @default -- See below
#             spec:
#               initialDelaySeconds: 0
#               periodSeconds: 10
#               timeoutSeconds: 1
#               failureThreshold: 3

#           # -- Readiness probe configuration
#           readiness:
#             # -- Enable the readiness probe
#             enabled: true
#             # -- Set this to `true` if you wish to specify your own readinessProbe
#             custom: false
#             # -- sets the probe type when not using a custom probe
#             # @default -- "TCP"
#             type: TCP
#             # -- The spec field contains the values for the default readinessProbe.
#             # If you selected `custom: true`, this field holds the definition of the readinessProbe.
#             # @default -- See below
#             spec:
#               initialDelaySeconds: 0
#               periodSeconds: 10
#               timeoutSeconds: 1
#               failureThreshold: 3

#           # -- Startup probe configuration
#           startup:
#             # -- Enable the startup probe
#             enabled: true
#             # -- Set this to `true` if you wish to specify your own startupProbe
#             custom: false
#             # -- sets the probe type when not using a custom probe
#             # @default -- "TCP"
#             type: TCP
#             # -- The spec field contains the values for the default startupProbe.
#             # If you selected `custom: true`, this field holds the definition of the startupProbe.
#             # @default -- See below
#             spec:
#               initialDelaySeconds: 0
#               timeoutSeconds: 1
#               ## This means it has a maximum of 5*30=150 seconds to start up before it fails
#               periodSeconds: 5
#               failureThreshold: 30

#         # -- Set the resource requests / limits for the container.
#         resources:
#           {}
#           ## We usually recommend not to specify default resources and to leave this as a conscious
#           ## choice for the user. This also increases chances charts run on environments with little
#           ## resources, such as Minikube. If you do want to specify resources, uncomment the following
#           ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
#           # limits:
#           #   cpu: 100m
#           #   memory: 128Mi
#           # requests:
#           #   cpu: 100m
#           #   memory: 128Mi

#         # -- Configure the Security Context for the container
#         securityContext: {}

#         # -- Configure the lifecycle event hooks for the container
#         # -- [[ref](https://kubernetes.io/docs/tasks/configure-pod-container/attach-handler-lifecycle-event/)]
#         lifecycle: {}

#         # -- Configure the path at which the file to which the containers termination message will be written.
#         # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
#         terminationMessagePath:

#         # -- Indicate how the containers termination message should be populated.
#         # Valid options are `File` and `FallbackToLogsOnError`.
#         # -- [[ref](https://kubernetes.io/docs/reference/kubernetes-api/workload-resources/pod-v1/#lifecycle-1)]
#         terminationMessagePolicy:

#     # -- Specify any initContainers here as dictionary items.
#     # Each initContainer should have its own key
#     initContainers: {}

serviceAccount:
  # -- Specifies whether a service account should be created
  # The identifier for this ServiceAccount will be `default`
  create: false

  # -- Annotations to add to the service account
  annotations: {}

  # -- Labels to add to the service account
  labels: {}

  # -- The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""

  # -- Additional Service Accounts to create
  # Each extra service account admit the same keys as the main service account
  extraServiceAccounts: {}
  #   serviceAccount2:
  #     create: true
  #     annotations:
  #       test: test
  #   serviceAccount3:
  #     create: true
  #     name: custom-service-account
  #     labels:
  #       test: test

# -- Use this to populate secrets with the values you specify.
# Be aware that these values are not encrypted by default, and could therefore visible
# to anybody with access to the values.yaml file.
# Additional Secrets can be added by adding a dictionary key similar to the 'secret' object.
# @default -- See below
secrets:
  {}
  # secret:
  #   # -- Enables or disables the Secret
  #   enabled: false
  #   # -- Labels to add to the Secret
  #   labels: {}
  #   # -- Annotations to add to the Secret
  #   annotations: {}
  #   # -- Secret stringData content. Helm template enabled.
  #   stringData:
  #     {}
  #     # foo: bar

# -- Configure configMaps for the chart here.
# Additional configMaps can be added by adding a dictionary key similar to the 'config' object.
# @default -- See below
configMaps:
  {}
  # config:
  #   # -- Enables or disables the configMap
  #   enabled: true
  #   # -- Labels to add to the configMap
  #   labels: {}
  #   # -- Annotations to add to the configMap
  #   annotations: {}
  #   # -- configMap data content. Helm template enabled.
  #   data:
  #     foo: bar

# -- A path in your parent's chart filesystem where you can add files to be converted into individual ConfigMaps.
# Your files will need to be two levels deep from the base path.
# For example, if you set this to `files/`, and you have this file tree
# files:
# └── configmap1
#     ├── file1
#     └── file2
# This will generate a ConfigMap named `configmap1` with keys `file1` and `file2`, values being the respective contents of those files.
# If your file contains `gotpl` syntax that you don't want templated by Helm, prefix the file extension with `.escape` and it will be treated as a regular string.
# For example, `file1.escape.yaml` will be converted to `file1.yaml` in the ConfigMap with the contents of the file not templated.
# If your file is a binary file like an image, prefix the file extension with `.binary`
# For example, `file1.binary.png` will be converted to `file1.png` in the ConfigMap under binaryData with the contents of the file base64 encoded.
configMapsFromFolderBasePath: null

# -- Configure the services for the chart here.
# Additional services can be added by adding a dictionary key similar to the 'main' service.
# @default -- See below
service:
  {}
  # main:
  #   # -- Enables or disables the service
  #   enabled: true

  #   # -- Override the name suffix that is used for this service
  #   nameOverride: ""

  #   # -- Configure which controller this service should target
  #   controller: main

  #   # -- Make this the primary service for this controller (used in probes, notes, etc...).
  #   # If there is more than 1 service targeting the controller, make sure that only 1 service is
  #   # marked as primary.
  #   primary: true

  #   # -- Set the service type
  #   type: ClusterIP

  #   # -- Specify the internalTrafficPolicy for the service. Options: Cluster, Local
  #   # -- [[ref](https://kubernetes.io/docs/concepts/services-networking/service-traffic-policy/)]
  #   internalTrafficPolicy:

  #   # -- Specify the externalTrafficPolicy for the service. Options: Cluster, Local
  #   # -- [[ref](https://kubernetes.io/docs/tutorials/services/source-ip/)]
  #   externalTrafficPolicy:

  #   # -- Specify the ip policy. Options: SingleStack, PreferDualStack, RequireDualStack
  #   ipFamilyPolicy:
  #   # -- The ip families that should be used. Options: IPv4, IPv6
  #   ipFamilies: []

  #   # -- Provide additional annotations which may be required.
  #   annotations: {}

  #   # -- Provide additional labels which may be required.
  #   labels: {}

  #   # -- Allow adding additional match labels
  #   extraSelectorLabels: {}

  #   # -- Configure the Service port information here.
  #   # Additional ports can be added by adding a dictionary key similar to the 'http' service.
  #   # @default -- See below
  #   ports:
  #     http:
  #       # -- Enables or disables the port
  #       enabled: true

  #       # -- Make this the primary port (used in probes, notes, etc...)
  #       # If there is more than 1 service, make sure that only 1 port is marked as primary.
  #       primary: true

  #       # -- The port number
  #       port:

  #       # -- Port protocol.
  #       # Support values are `HTTP`, `HTTPS`, `TCP` and `UDP`.
  #       # HTTP and HTTPS spawn a TCP service and get used for internal URL and name generation
  #       protocol: HTTP

  #       # -- Specify a service targetPort if you wish to differ the service port from the application port.
  #       # If `targetPort` is specified, this port number is used in the container definition instead of
  #       # the `port` value. Therefore named ports are not supported for this field.
  #       targetPort:

  #       # -- Specify the nodePort value for the LoadBalancer and NodePort service types.
  #       # [[ref]](https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport)
  #       nodePort:

  #       # -- Specify the appProtocol value for the Service.
  #       # [[ref]](https://kubernetes.io/docs/concepts/services-networking/service/#application-protocol)
  #       appProtocol:

# -- Configure the ingresses for the chart here.
ingress:
  {}

  # -- An example is shown below
  # main:
  #   # -- Enables or disables the ingress
  #   enabled: true

  #   # -- Override the name suffix that is used for this ingress.
  #   nameOverride:

  #   # -- Provide additional annotations which may be required. Helm templates can be used.
  #   annotations: {}

  #   # -- Provide additional labels which may be required. Helm templates can be used.
  #   labels: {}

  #   # -- Set the ingressClass that is used for this ingress.
  #   className:

  #   # -- Configure the defaultBackend for this ingress. This will disable any other rules for the ingress.
  #   defaultBackend:

  #   ## Configure the hosts for the ingress
  #   hosts:
  #     - # -- Host address. Helm template can be passed.
  #       host: chart-example.local
  #       ## Configure the paths for the host
  #       paths:
  #         - # -- Path.  Helm template can be passed.
  #           path: /
  #           pathType: Prefix
  #           service:
  #             # -- Overrides the service name reference for this path
  #             # The service name to reference.
  #             name: main
  #             # -- Reference a service identifier from this values.yaml
  #             identifier: main
  #             # -- Overrides the service port number reference for this path
  #             port:

  #   # -- Configure TLS for the ingress. Both secretName and hosts can process a Helm template.
  #   tls: []
  #   #  - secretName: chart-example-tls
  #   #    hosts:
  #   #      - chart-example.local

# -- Configure the ServiceMonitors for the chart here.
# Additional ServiceMonitors can be added by adding a dictionary key similar to the 'main' ServiceMonitors.
# @default -- See below
serviceMonitor:
  {}
  # main:
  #   # -- Enables or disables the serviceMonitor.
  #   enabled: false

  #   # -- Override the name suffix that is used for this serviceMonitor.
  #   nameOverride: ""

  #   # -- Provide additional annotations which may be required.
  #   annotations: {}

  #   # -- Provide additional labels which may be required.
  #   labels: {}

  #   # -- Configures a custom selector for the serviceMonitor, this takes precedence over
  #   # specifying a service name.
  #   # Helm templates can be used.
  #   selector: {}

  #   # -- Configures the target Service for the serviceMonitor. Helm templates can be used.
  #   serviceName: '{{ include "bjw-s.common.lib.chart.names.fullname" $ }}'

  #   # -- Configures the endpoints for the serviceMonitor.
  #   # @default -- See values.yaml
  #   endpoints:
  #     - port: http
  #       scheme: http
  #       path: /metrics
  #       interval: 1m
  #       scrapeTimeout: 10s

  #   # -- Configures custom targetLabels for the serviceMonitor. (All collected
  #   # meterics will have these labels, taking the value from the target service)
  #   # [[ref]](https://github.com/prometheus-operator/prometheus-operator/blob/main/Documentation/api.md#servicemonitorspec/)
  #   targetLabels: []

# -- Configure the gateway routes for the chart here.
# Additional routes can be added by adding a dictionary key similar to the 'main' route.
# [[ref]](https://gateway-api.sigs.k8s.io/references/spec/)
# @default -- See below
route:
  {}
  # main:
  #   # -- Enables or disables the route
  #   enabled: false

  #   # -- Set the route kind
  #   # Valid options are GRPCRoute, HTTPRoute, TCPRoute, TLSRoute, UDPRoute
  #   kind: HTTPRoute

  #   # -- Override the name suffix that is used for this route.
  #   nameOverride: ""

  #   # -- Provide additional annotations which may be required.
  #   annotations: {}

  #   # -- Provide additional labels which may be required.
  #   labels: {}

  #   # -- Configure the resource the route attaches to.
  #   parentRefs:
  #     - # Group of the referent resource.
  #       group: gateway.networking.k8s.io
  #       # Kind of the referent resource.
  #       kind: Gateway
  #       # Name of the referent resource
  #       name:
  #       # Namespace of the referent resource
  #       namespace:
  #       # Name of the section within the target resource.
  #       sectionName:

  #   # -- Host addresses. Helm template can be passed.
  #   hostnames: []

  #   # -- Configure rules for routing. Defaults to the primary service.
  #   rules:
  #     - # -- Configure backends where matching requests should be sent.
  #       backendRefs: []
  #       ## Configure conditions used for matching incoming requests. Only for HTTPRoutes
  #       matches:
  #         - path:
  #             type: PathPrefix
  #             value: /
  #       ## Request filters that are applied to the rules.
  #       filters: []
  #       ## Request timeout that are applied to the rules.
  #       timeouts: {}

# -- Configure persistence for the chart here.
# Additional items can be added by adding a dictionary key similar to the 'config' key.
# [[ref]](https://bjw-s.github.io/helm-charts/docs/common-library/common-library-storage)
# @default -- See below
persistence:
  {}
  # config:
  #   # -- Enables or disables the persistence item. Defaults to true
  #   enabled: false

  #   # -- Sets the persistence type
  #   # Valid options are persistentVolumeClaim, emptyDir, nfs, hostPath, secret, configMap or custom
  #   type: persistentVolumeClaim

  #   # -- Storage Class for the config volume.
  #   # If set to `-`, dynamic provisioning is disabled.
  #   # If set to something else, the given storageClass is used.
  #   # If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner.
  #   storageClass: # "-"

  #   # -- If you want to reuse an existing claim, the name of the existing PVC can be passed here.
  #   existingClaim: # your-claim

  #   # -- The optional data source for the persistentVolumeClaim.
  #   # [[ref]](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#volume-populators-and-data-sources)
  #   dataSource: {}

  #   # -- The optional volume populator for the persistentVolumeClaim.
  #   # [[ref]](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#volume-populators-and-data-sources)
  #   dataSourceRef: {}

  #   # -- AccessMode for the persistent volume.
  #   # Make sure to select an access mode that is supported by your storage provider!
  #   # [[ref]](https://kubernetes.io/docs/concepts/storage/persistent-volumes/#access-modes)
  #   accessMode: ReadWriteOnce

  #   # -- The amount of storage that is requested for the persistent volume.
  #   size: 1Gi

  #   # -- Set to true to retain the PVC upon `helm uninstall`
  #   retain: false

  #   # -- Configure mounts to all controllers and containers. By default the persistence item
  #   # will be mounted to `/<name_of_the_peristence_item>`.
  #   # Example:
  #   # globalMounts:
  #   #   - path: /config
  #   #     readOnly: false
  #   globalMounts: []

  #   # -- Explicitly configure mounts for specific controllers and containers.
  #   # Example:
  #   # advancedMounts:
  #   #   main: # the controller with the "main" identifier
  #   #     main: # the container with the "main" identifier
  #   #       - path: /data/config.yaml
  #   #         readOnly: true
  #   #         mountPropagation: None
  #   #         subPath: config.yaml
  #   #     second-container: # the container with the "second-container" identifier
  #   #       - path: /appdata/config
  #   #         readOnly: true
  #   #   second-controller: # the controller with the "second-controller" identifier
  #   #     main: # the container with the "main" identifier
  #   #       - path: /data/config.yaml
  #   #         readOnly: false
  #   #         subPath: config.yaml
  #   advancedMounts: {}

# -- Configure the networkPolicies for the chart here.
# Additional networkPolicies can be added by adding a dictionary key similar to the 'main' networkPolicy.
# @default -- See below
networkpolicies:
  {}
  # main:
  #   # -- Enables or disables the networkPolicy item. Defaults to true
  #   enabled: false

  #   # -- Configure which controller this networkPolicy should target
  #   controller: main

  #   # -- Define a custom podSelector for the networkPolicy. This takes precedence over targeting a controller.
  #   # podSelector: {}

  #   # -- The policyTypes for this networkPolicy
  #   policyTypes:
  #     - Ingress
  #     - Egress

  #   # -- The rulesets for this networkPolicy
  #   # [[ref]](https://kubernetes.io/docs/concepts/services-networking/network-policies/#networkpolicy-resource)
  #   rules:
  #     # -- The ingress rules for this networkPolicy. Allows all ingress traffic by default.
  #     ingress:
  #       - {}
  #     # -- The egress rules for this networkPolicy. Allows all egress traffic by default.
  #     egress:
  #       - {}

# -- Configure any unsupported raw resources here.
# @default -- See below
rawResources:
  {}
  # example:
  #   # -- Enables or disables the resource. Defaults to true
  #   enabled: false
  #   # -- Specify the apiVersion of the resource.
  #   apiVersion: v1
  #   # -- Specify the kind of the resource.
  #   kind: Endpoint
  #   # -- Override the name suffix that is used for this resource.
  #   nameOverride: ""
  #   # -- Provide additional annotations which may be required.
  #   annotations: {}
  #   # -- Provide additional labels which may be required.
  #   labels: {}
  #   # -- Configure the contents of the resource that is to be rendered.
  #   spec:

# -- Configure the Roles and Role Bindings for the chart here.
rbac:
  {}
  # roles:
  #   role1:
  #     # -- Force replace the name of the object.
  #     forceRename: <force name>
  #     # -- Enables or disables the Role. Can be templated.
  #     enabled: true
  #     # -- Set to Role,ClusterRole
  #     type: Role
  #     rules:
  #       - apiGroups: ["*"]
  #         resources: ["*"]
  #         verbs: ["get", "list", "watch"]
  # bindings:
  #   binding1:
  #     # -- Force replace the name of the object.
  #     forceRename: <force name>
  #     # -- Enables or disables the Role. Can be templated.
  #     enabled: true
  #     # -- Set to RoleBinding,ClusterRoleBinding
  #     type: RoleBinding
  #     # -- Can be an identifier of rbac.roles or a custom name and kind
  #     roleRef:
  #       name: test-role
  #       kind: Role
  #       identifier: test
  #     # -- If using an identifier it will be automatically filled, otherwise every key will need to be explicitly declared
  #     subjects:
  #       - identifier: default
  #       - kind: ServiceAccount
  #         name: test
  #         namespace: "{{ .Release.Namespace }}"