Init cm12.1

Android.mk

@@ -0,0 +1,42 @@
+# Copyright (C) 2014 The CyanogenMod Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file is generated by device/samsung/viennalte/setup-makefiles.sh
+
+LOCAL_PATH := $(call my-dir)
+
+ifneq ($(filter viennalte,$(TARGET_DEVICE)),)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := libtime_genoff
+LOCAL_MODULE_OWNER := samsung
+LOCAL_SRC_FILES := proprietary/vendor/lib/libtime_genoff.so
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_SUFFIX := .so
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR_SHARED_LIBRARIES)
+include $(BUILD_PREBUILT)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := libril
+LOCAL_MODULE_OWNER := samsung
+LOCAL_SRC_FILES := proprietary/lib/libril.so
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_SUFFIX := .so
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)
+LOCAL_OVERRIDES_PACKAGES := libril
+include $(BUILD_PREBUILT)
+
+endif

proprietary/etc/imx134_module_info.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0"?>
+<moduleinfo>
+	<coreversion value="E"/>
+	<resolution value="08"/>
+	<isp value="Q"/>
+	<sensormaker value="S"/>
+	<year value="G"/>
+	<month value="G"/>
+	<month value="I mondrian"/>
+	<iteration value="01"/>
+	<modulemaker value="O"/>
+	<modulemaker value="A mondrian"/>
+	<modulemakerversion value="E"/>
+	<modulemakerversion value="C vienna"/>
+	<modulemakerversion value="A mondrian"/>
+	<clnumber value="1234567890"/>
+</moduleinfo>

proprietary/etc/imx135_module_info.xml

@@ -0,0 +1,13 @@
+<?xml version="1.0"?>
+<moduleinfo>
+	<coreversion value="D"/>
+	<resolution value="13"/>
+	<isp value="Q"/>
+	<sensormaker value="S"/>
+	<year value="G"/>
+	<month value="D"/>
+	<iteration value="19"/>
+	<modulemaker value="O"/>
+	<modulemakerversion value="A"/>
+	<clnumber value="1323073"/>
+</moduleinfo>

proprietary/etc/sec_config

@@ -0,0 +1,271 @@
+/* IPC Security Config */
+/* <GPS QMI Service ID - 16>:<GPS QMI Instance ID - all instances>:<Client Group ID> */
+16:4294967295:1000:3004
+/* Allow SS CTL service to be used by system and net_raw processes */
+43:4294967295:1000:3004
+/* Allow Sensor services to be used by sensor process */
+256:4294967295:3011
+257:4294967295:3011
+258:4294967295:3011
+259:4294967295:3011
+260:4294967295:3011
+261:4294967295:3011
+262:4294967295:3011
+263:4294967295:3011
+264:4294967295:3011
+265:4294967295:3011
+266:4294967295:3011
+267:4294967295:3011
+268:4294967295:3011
+269:4294967295:3011
+270:4294967295:3011
+271:4294967295:3011
+272:4294967295:3011
+273:4294967295:3011
+274:4294967295:3011
+275:4294967295:3011
+276:4294967295:3011
+277:4294967295:3011
+278:4294967295:3011
+279:4294967295:3011
+280:4294967295:3011
+281:4294967295:3011
+282:4294967295:3011
+283:4294967295:3011
+284:4294967295:3011
+285:4294967295:3011
+286:4294967295:3011
+287:4294967295:3011
+288:4294967295:3011
+289:4294967295:3011
+290:4294967295:3011
+291:4294967295:3011
+292:4294967295:3011
+293:4294967295:3011
+294:4294967295:3011
+295:4294967295:3011
+296:4294967295:3011
+297:4294967295:3011
+298:4294967295:3011
+299:4294967295:3011
+300:4294967295:3011
+301:4294967295:3011
+302:4294967295:3011
+303:4294967295:3011
+304:4294967295:3011
+305:4294967295:3011
+306:4294967295:3011
+307:4294967295:3011
+308:4294967295:3011
+309:4294967295:3011
+310:4294967295:3011
+311:4294967295:3011
+312:4294967295:3011
+313:4294967295:3011
+314:4294967295:3011
+315:4294967295:3011
+316:4294967295:3011
+317:4294967295:3011
+318:4294967295:3011
+319:4294967295:3011
+320:4294967295:3011
+321:4294967295:3011
+322:4294967295:3011
+323:4294967295:3011
+324:4294967295:3011
+325:4294967295:3011
+326:4294967295:3011
+327:4294967295:3011
+328:4294967295:3011
+329:4294967295:3011
+330:4294967295:3011
+331:4294967295:3011
+332:4294967295:3011
+333:4294967295:3011
+334:4294967295:3011
+335:4294967295:3011
+336:4294967295:3011
+337:4294967295:3011
+338:4294967295:3011
+339:4294967295:3011
+340:4294967295:3011
+341:4294967295:3011
+342:4294967295:3011
+343:4294967295:3011
+344:4294967295:3011
+345:4294967295:3011
+346:4294967295:3011
+347:4294967295:3011
+348:4294967295:3011
+349:4294967295:3011
+350:4294967295:3011
+351:4294967295:3011
+352:4294967295:3011
+353:4294967295:3011
+354:4294967295:3011
+355:4294967295:3011
+356:4294967295:3011
+357:4294967295:3011
+358:4294967295:3011
+359:4294967295:3011
+360:4294967295:3011
+361:4294967295:3011
+362:4294967295:3011
+363:4294967295:3011
+364:4294967295:3011
+365:4294967295:3011
+366:4294967295:3011
+367:4294967295:3011
+368:4294967295:3011
+369:4294967295:3011
+370:4294967295:3011
+371:4294967295:3011
+372:4294967295:3011
+373:4294967295:3011
+374:4294967295:3011
+375:4294967295:3011
+376:4294967295:3011
+377:4294967295:3011
+378:4294967295:3011
+379:4294967295:3011
+380:4294967295:3011
+381:4294967295:3011
+382:4294967295:3011
+383:4294967295:3011
+384:4294967295:3011
+385:4294967295:3011
+386:4294967295:3011
+387:4294967295:3011
+388:4294967295:3011
+389:4294967295:3011
+390:4294967295:3011
+391:4294967295:3011
+392:4294967295:3011
+393:4294967295:3011
+394:4294967295:3011
+395:4294967295:3011
+396:4294967295:3011
+397:4294967295:3011
+398:4294967295:3011
+399:4294967295:3011
+400:4294967295:3011
+401:4294967295:3011
+402:4294967295:3011
+403:4294967295:3011
+404:4294967295:3011
+405:4294967295:3011
+406:4294967295:3011
+407:4294967295:3011
+408:4294967295:3011
+409:4294967295:3011
+410:4294967295:3011
+411:4294967295:3011
+412:4294967295:3011
+413:4294967295:3011
+414:4294967295:3011
+415:4294967295:3011
+416:4294967295:3011
+417:4294967295:3011
+418:4294967295:3011
+419:4294967295:3011
+420:4294967295:3011
+421:4294967295:3011
+422:4294967295:3011
+423:4294967295:3011
+424:4294967295:3011
+425:4294967295:3011
+426:4294967295:3011
+427:4294967295:3011
+428:4294967295:3011
+429:4294967295:3011
+430:4294967295:3011
+431:4294967295:3011
+432:4294967295:3011
+433:4294967295:3011
+434:4294967295:3011
+435:4294967295:3011
+436:4294967295:3011
+437:4294967295:3011
+438:4294967295:3011
+439:4294967295:3011
+440:4294967295:3011
+441:4294967295:3011
+442:4294967295:3011
+443:4294967295:3011
+444:4294967295:3011
+445:4294967295:3011
+446:4294967295:3011
+447:4294967295:3011
+448:4294967295:3011
+449:4294967295:3011
+450:4294967295:3011
+451:4294967295:3011
+452:4294967295:3011
+453:4294967295:3011
+454:4294967295:3011
+455:4294967295:3011
+456:4294967295:3011
+457:4294967295:3011
+458:4294967295:3011
+459:4294967295:3011
+460:4294967295:3011
+461:4294967295:3011
+462:4294967295:3011
+463:4294967295:3011
+464:4294967295:3011
+465:4294967295:3011
+466:4294967295:3011
+467:4294967295:3011
+468:4294967295:3011
+469:4294967295:3011
+470:4294967295:3011
+471:4294967295:3011
+472:4294967295:3011
+473:4294967295:3011
+474:4294967295:3011
+475:4294967295:3011
+476:4294967295:3011
+477:4294967295:3011
+478:4294967295:3011
+479:4294967295:3011
+480:4294967295:3011
+481:4294967295:3011
+482:4294967295:3011
+483:4294967295:3011
+484:4294967295:3011
+485:4294967295:3011
+486:4294967295:3011
+487:4294967295:3011
+488:4294967295:3011
+489:4294967295:3011
+490:4294967295:3011
+491:4294967295:3011
+492:4294967295:3011
+493:4294967295:3011
+494:4294967295:3011
+495:4294967295:3011
+496:4294967295:3011
+497:4294967295:3011
+498:4294967295:3011
+499:4294967295:3011
+500:4294967295:3011
+501:4294967295:3011
+502:4294967295:3011
+503:4294967295:3011
+504:4294967295:3011
+505:4294967295:3011
+506:4294967295:3011
+507:4294967295:3011
+508:4294967295:3011
+509:4294967295:3011
+510:4294967295:3011
+511:4294967295:3011
+/* Allow RCS service to aquire net_raw permission */
+18:4294967295:1001:3004
+/* Allow QMID service to aquire net_raw permission */
+3:4294967295:1001:3004
+2:4294967295:1001:3004
+42:4294967295:1001:3004
+18:4294967295:1001:3004
+9:4294967295:1001:3004
+1:4294967295:1001:3004

proprietary/etc/wifi/WCNSS_qcom_cfg.ini

@@ -0,0 +1,377 @@
+# This file allows user to override the factory
+
+# defaults for the WLAN Driver
+
+
+# Enable IMPS or not
+gEnableImps=1
+
+# Enable/Disable Idle Scan
+
+gEnableIdleScan=0
+
+
+# Increase sleep duration (seconds) during IMPS
+# 0 implies no periodic wake up from IMPS. Periodic wakeup is
+# unnecessary if Idle Scan is disabled.
+gImpsModSleepTime=0
+
+
+# Enable BMPS or not
+gEnableBmps=1
+
+# Enable suspend or not
+
+# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
+
+gEnableSuspend=3
+
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+gDot11Mode=0
+
+
+# CSR Roaming Enable(1) Disable(0)
+
+gRoamingTime=0
+
+
+# Assigned MAC Addresses - This will be used until NV items are in place
+
+# Each byte of MAC address is represented in Hex format as XX
+
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+
+Intf3MacAddress=000AF58989FC
+
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+
+InfraUapsdVoSrvIntv=0
+
+InfraUapsdViSrvIntv=0
+
+InfraUapsdBeSrvIntv=0
+
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# Make 1x1 the default antenna configuration
+
+gNumRxAnt=1
+
+
+# Beacon filtering frequency (unit in beacon intervals)
+
+gNthBeaconFilter=50
+
+
+# Enable WAPI or not
+
+# WAPIIsEnabled=0
+
+
+# Flags to filter Mcast abd Bcast RX packets.
+
+# Value 0: No filtering, 1: Filter all Multicast.
+
+# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
+
+McastBcastFilter=3
+
+
+#Flag to enable HostARPOffload feature or not
+
+hostArpOffload=1
+
+
+#SoftAP Related Parameters
+
+# AP MAc addr
+
+gAPMacAddr=000AF589dcab
+
+
+# 802.11n Protection flag
+
+gEnableApProt=1
+
+
+#Enable OBSS protection
+
+gEnableApOBSSProt=1
+
+
+#Enable/Disable UAPSD for SoftAP
+
+gEnableApUapsd=1
+
+
+# Fixed Rate
+
+gFixedRate=0
+
+
+# Maximum Tx power
+
+# gTxPowerCap=30
+
+
+# Fragmentation Threshold
+
+# gFragmentationThreshold=2346
+
+
+# RTS threshold
+
+RTSThreshold=2347
+
+
+# Intra-BSS forward
+
+gDisableIntraBssFwd=0
+
+
+# WMM Enable/Disable
+
+WmmIsEnabled=0
+
+
+# 802.11d support
+
+g11dSupportEnabled=1
+
+# CCX Support and fast transition
+CcxEnabled=0
+FastTransitionEnabled=1
+ImplicitQosIsEnabled=0
+gNeighborScanTimerPeriod=200
+
+gNeighborScanChannelMinTime=20
+gNeighborScanChannelMaxTime=30
+
+# Legacy (non-CCX, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
+#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
+#the RSSI of the new/roamable AP should be for roaming
+RoamRssiDiff=5
+
+# SAP Country code
+
+# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
+
+# Example
+
+#   US Indoor, USI
+
+#   Korea Outdoor, KRO
+
+#   Japan without optional byte, JP
+
+#   France without optional byte, FR
+
+#gAPCntryCode=USI
+
+
+#Short Guard Interval Enable/disable
+
+gShortGI20Mhz=1
+
+gShortGI40Mhz=1
+
+
+#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
+
+gAPAutoShutOff=0
+
+
+# SAP auto channel selection configuration
+
+# 0 = disable auto channel selection
+
+# 1 = enable auto channel selection, channel provided by supplicant will be ignored
+
+gApAutoChannelSelection=1
+
+
+# Listen Energy Detect Mode Configuration
+
+# Valid values 0-128
+
+# 128 means disable Energy Detect feature
+
+# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
+
+# 10-128 are reserved.
+
+# The EDET threshold mapping is as follows in 3dB step:
+
+# 0 = -60 dBm
+
+# 1 = -63 dBm
+
+# 2 = -66 dBm
+
+# ...
+
+# 7 = -81 dBm
+
+# 8 = -84 dBm
+
+# 9 = -87 dBm
+
+# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
+
+#
+
+#  Range Loss  (dB)  =  EDET threshold level (dBm) + 97 dBm.
+
+#
+
+gEnablePhyAgcListenMode=128
+
+
+#Preferred channel to start BT AMP AP mode (0 means, any channel)
+
+BtAmpPreferredChannel=0
+
+
+#Preferred band (both or 2.4 only or 5 only)
+
+BandCapability=0
+
+
+#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
+
+enableBeaconEarlyTermination=1
+
+beaconEarlyTerminationWakeInterval=11
+
+
+#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
+
+gEnableBtAmp=0
+
+
+#SOFTAP Channel Range selection
+
+gAPChannelSelectStartChannel=1
+
+gAPChannelSelectEndChannel=11
+
+
+#SOFTAP Channel Range selection Operating band
+
+# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
+
+gAPChannelSelectOperatingBand=0
+
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+
+#Enable Keep alive with non-zero period value
+
+gStaKeepAlivePeriod=30
+
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT sends Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
+#For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
+#If doesn't honor for 5 seconds then Driver remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still DUT try on
+#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
+#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod +gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
+#where we send NULL frame.
+
+#gApLinkMonitorPeriod = 10
+
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
+#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
+
+gGoKeepAlivePeriod = 30
+
+gApKeepAlivePeriod = 10
+
+#If set will start with active scan after driver load, otherwise will start with
+
+#passive scan to find out the domain
+
+#gEnableBypass11d=1
+
+
+#If set to 0, will not scan DFS channels
+
+gEnableDFSChnlScan=1
+
+
+gVhtChannelWidth=2
+gEnableLogp=1
+
+
+# Enable Automatic Tx Power control
+
+gEnableAutomaticTxPowerControl=1
+
+# 0 for OLPC 1 for CLPC and SCPC
+gEnableCloseLoop=1
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+gEnableLpwrImgTransition=1
+
+# Enable Tx beamforming
+gTxBFEnable=1
+
+# Enable Tx LDPC
+#gTxLdpcEnable = 1 for HT mode, 2 for VHT mode,3 for both HT and VHT
+gTxLdpcEnable=3
+
+#FlexConnect Power Factor
+#Default is set to 0 (disable)
+gFlexConnectPowerFactor=0
+
+# Valid values are 2048,4096,8192 and so on
+# Please don't use values other than the ones mentioned above
+gMaxMediumTime=4096
+
+# 802.11K support
+gRrmEnable=1
+gRrmOperChanMax=8
+gRrmNonOperChanMax=8
+gRrmRandIntvl=100
+
+#Enable/Disable Modulated DTIM feature
+gEnableModulatedDTIM=3
+
+#max LI value for modulated DTIM
+gMaxLIModulatedDTIM=3
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+

proprietary/etc/wifi/cred.conf

@@ -0,0 +1,3 @@
+cred={
+	imsi="?"
+}

proprietary/etc/wifi/nvram_mfg.txt_4339_a0

@@ -0,0 +1,104 @@
+#SS V1 Rev08 with ECO for BCM4339 / AARDVARK01T_REL_6_37_32_10
+sromrev=11
+boardrev=0x1100
+boardtype=0x06b5
+boardflags=0x10401001
+boardflags2=0x0
+boardflags3=0x810c489
+macaddr=00:90:4c:c5:12:38
+ccode=ALL
+regrev=0
+antswitch=0
+pdgain5g=1
+pdgain2g=1
+tworangetssi2g=0
+tworangetssi5g=0
+femctrl=4
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+#otpimagesize=502
+xtalfreq=37400
+extpagain2g=1
+pdetrange2g=2
+extpagain5g=1
+pdetrange5g=2
+rxgains2gelnagaina0=3
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=3
+rxgains5gtrisoa0=6
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+agbg0=0
+aga0=0
+tssipos5g=1
+tssipos2g=1
+
+#2G / 5G 2dB Backoff
+pa2gccka0=0xff43,0x166a,0xfd34
+pa2ga0=0xff4e,0x1694,0xfd46
+pa5ga0=0xffa0,0x184b,0xfd3b,0xffc0,0x18c5,0xfd6d,0xff75,0x17e7,0xfd30,0xff7a,0x1921,0xfd0d
+pa5gbw40a0=0xff52,0x1851,0xfccd,0xffa0,0x18cf,0xfd60,0xff7a,0x18f5,0xfd26,0xffa1,0x1b4b,0xfd10
+pa5gbw80a0=0xff6c,0x1718,0xfd20,0xff80,0x17fd,0xfd1c,0xff72,0x182f,0xfd19,0xff3a,0x169f,0xfd14
+
+
+
+
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0x88866666
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+mcslr5glpo=0x0000
+mcsbw205glpo=0x88866666
+mcsbw405glpo=0xAAA88888
+mcsbw805glpo=0xCCCAAAAA
+mcslr5gmpo=0x0000
+mcsbw205gmpo=0x88866666
+mcsbw405gmpo=0xAAA88888
+mcsbw805gmpo=0xCCCAAAAA
+mcslr5ghpo=0x0000
+mcsbw205ghpo=0x88866666
+mcsbw405ghpo=0xAAA88888
+mcsbw805ghpo=0xCCCAAAAA
+sb20in40hrrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+#tssifloor5g=220,213,218,228
+#tssifloor2g=245
+cckdigfilttype=2
+##2G Channel pwr compensation (CH12/3/2/1, CH5/4/14/13, CH9/8/7/6, NA/NA/11/10)
+rpcal2g=0x2433
+rpcal5gb0=0x1201
+rpcal5gb1=0x3321
+rpcal5gb2=0x0034
+muxenab=0x10
+##2G RSSI compensation 20/40
+rssicorrnorm_c0=3,3
+##5G RSSI compenation Low(36-48):20/40/80, Mid(54-64):20/40/80, High(100-140):20/40/80, X1(149-165):20/40/80
+rssicorrnorm5g_c0=0,0,0,0,0,0,0,0,0,0,0,0
+
+

proprietary/etc/wifi/nvram_mfg.txt_4354_a0

@@ -0,0 +1,167 @@
+# Sample variables file for Samsung BCM4354WLBGA iPA, eLNA board with SDIO for production package
+# V1-LTE Rev0.9 - 2014. 01. 05
+NVRAMRev=$Rev: 373428 $
+sromrev=11
+boardrev=0x1101
+boardtype=0x06db
+boardflags=0x12401001
+boardflags2=0x00802000
+boardflags3=0x40000109
+
+macaddr=00:90:4c:16:70:01
+ccode=ALL
+regrev=0
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+devid=0x43a3
+#devid=0x43df
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+muxenab=0x10
+xtalfreq=37400
+
+## Rx setting for Ant0
+rxgains2gelnagaina0=3
+rxgains5gelnagaina0=3
+rxgains5gmelnagaina0=3
+rxgains5ghelnagaina0=3
+
+rxgains2gtrelnabypa0=1
+rxgains5gtrelnabypa0=1
+rxgains5gmtrelnabypa0=1
+rxgains5ghtrelnabypa0=1
+
+rxgains2gtrisoa0=5
+rxgains5gtrisoa0=5
+rxgains5gmtrisoa0=5
+rxgains5ghtrisoa0=5
+
+## Rx setting for Ant1
+
+rxgains2gelnagaina1=3
+rxgains5gelnagaina1=3
+rxgains5gmelnagaina1=3
+rxgains5ghelnagaina1=3
+
+rxgains2gtrelnabypa1=1
+rxgains5gtrelnabypa1=1
+rxgains5gmtrelnabypa1=1
+rxgains5ghtrelnabypa1=1
+
+rxgains2gtrisoa1=5
+rxgains5gtrisoa1=5
+rxgains5gmtrisoa1=5
+rxgains5ghtrisoa1=5
+
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+
+## Rev0.9 TSSI Calibration -2013.12.02
+
+pa2ga0=0xff71,0x174d,0xfd66
+pa2ga1=0xff86,0x195a,0xfd45
+pa5ga0=0xff3e,0x192a,0xfcf9,0xff23,0x164b,0xfd3f,0xff67,0x1a0d,0xfd10,0xff5f,0x1a63,0xfcf7
+pa5ga1=0xff29,0x17d6,0xfcfb,0xff50,0x1965,0xfd00,0xff35,0x1847,0xfd0a,0xff35,0x187e,0xfcf3
+
+## V1-LTE Target Power
+## 2G: 11b-16.5dBm/11g-16/14.5dBm/11n-15/13dBm/11ac-15/12dBm
+## 5G: 11a-16/14dBm/11n-16/13dBm/11ac-16/12dBm
+maxp2ga0=76
+maxp5ga0=76,76,76,76
+maxp2ga1=76
+maxp5ga1=74,74,76,76
+subband5gver=0x4
+pdoffsetcckma0=0x7
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+
+cckbw202gpo=0x1111
+cckbw20ul2gpo=0x0000
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+mcsbw202gpo=0xbb999999
+mcsbw402gpo=0xccbbbbbb
+
+mcsbw205glpo=0xbb966666
+mcsbw405glpo=0xddb88888
+mcsbw805glpo=0xffdaaaaa
+
+mcsbw205gmpo=0xbb966666
+mcsbw405gmpo=0xddb88888
+mcsbw805gmpo=0xffdaaaaa
+
+
+mcsbw205ghpo=0xbb966666
+mcsbw405ghpo=0xddb88888
+mcsbw805ghpo=0xffdaaaaa
+
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+
+#phycal_tempdelta=255
+#changes periodic calibration for the temperature 
+phycal_tempdelta=25
+temps_period=15
+temps_hysteresis=15
+
+AvVmid_c0=2,140,2,145,2,145,2,145,2,145
+AvVmid_c1=2,140,2,145,2,145,2,145,2,145
+AvVmid_c2=0,0,0,0,0,0,0,0,0,0
+
+rssicorrnorm_c0=3,3
+rssicorrnorm_c1=3,3
+rssicorrnorm5g_c0=1,2,3,1,2,2,0,1,1,1,2,2
+rssicorrnorm5g_c1=1,2,3,0,2,2,1,2,3,3,3,4
+
+swctrlmap_5g=0x00000202,0x05050000,0x04040000,0x000000,0x047
+swctrlmap_2g=0x0000140c,0x28300000,0x08200000,0x803000,0x0ff
+
+cckdigfilttype=1
+## 2G TX power compensation in room temp
+powoffs2gtna0=2,1,1,1,1,1,0,0,0,0,1,1,2,0
+powoffs2gtna1=2,2,2,2,2,1,1,0,-1,-1,-1,0,1,0
+
+#BT coex
+btc_mode=1

proprietary/etc/wifi/nvram_mfg.txt_4354_a1

@@ -0,0 +1,165 @@
+# Sample variables file for Samsung BCM4354WLBGA iPA, eLNA board with SDIO for production package
+# V1-LTE Rev0.9 - 2014. 01. 05
+NVRAMRev=$Rev: 373428 $
+sromrev=11
+boardrev=0x1101
+boardtype=0x06db
+boardflags=0x12401001
+boardflags2=0x00802000
+boardflags3=0x40000109
+
+macaddr=00:90:4c:16:70:01
+ccode=ALL
+regrev=0
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+#devid=0x43a3
+devid=0x43df
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+muxenab=0x10
+xtalfreq=37400
+
+## Rx setting for Ant0
+rxgains2gelnagaina0=3
+rxgains5gelnagaina0=3
+rxgains5gmelnagaina0=3
+rxgains5ghelnagaina0=3
+
+rxgains2gtrelnabypa0=1
+rxgains5gtrelnabypa0=1
+rxgains5gmtrelnabypa0=1
+rxgains5ghtrelnabypa0=1
+
+rxgains2gtrisoa0=5
+rxgains5gtrisoa0=5
+rxgains5gmtrisoa0=5
+rxgains5ghtrisoa0=5
+
+## Rx setting for Ant1
+
+rxgains2gelnagaina1=3
+rxgains5gelnagaina1=3
+rxgains5gmelnagaina1=3
+rxgains5ghelnagaina1=3
+
+rxgains2gtrelnabypa1=1
+rxgains5gtrelnabypa1=1
+rxgains5gmtrelnabypa1=1
+rxgains5ghtrelnabypa1=1
+
+rxgains2gtrisoa1=5
+rxgains5gtrisoa1=5
+rxgains5gmtrisoa1=5
+rxgains5ghtrisoa1=5
+
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+
+## Rev0.9 TSSI Calibration -2013.12.02
+
+pa2ga0=0xff71,0x174d,0xfd66
+pa2ga1=0xff86,0x195a,0xfd45
+pa5ga0=0xff3e,0x192a,0xfcf9,0xff23,0x164b,0xfd3f,0xff67,0x1a0d,0xfd10,0xff5f,0x1a63,0xfcf7
+pa5ga1=0xff29,0x17d6,0xfcfb,0xff50,0x1965,0xfd00,0xff35,0x1847,0xfd0a,0xff35,0x187e,0xfcf3
+
+maxp2ga0=76
+maxp5ga0=76,76,76,76
+maxp2ga1=76
+maxp5ga1=74,74,76,76
+subband5gver=0x4
+pdoffsetcckma0=0x7
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+
+cckbw202gpo=0x1111
+cckbw20ul2gpo=0x0000
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+mcsbw202gpo=0xbb999999
+mcsbw402gpo=0xccbbbbbb
+
+mcsbw205glpo=0xbb966666
+mcsbw405glpo=0xddb88888
+mcsbw805glpo=0xffdaaaaa
+
+mcsbw205gmpo=0xbb966666
+mcsbw405gmpo=0xddb88888
+mcsbw805gmpo=0xffdaaaaa
+
+
+mcsbw205ghpo=0xbb966666
+mcsbw405ghpo=0xddb88888
+mcsbw805ghpo=0xffdaaaaa
+
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+
+#phycal_tempdelta=255
+#changes periodic calibration for the temperature 
+phycal_tempdelta=25
+temps_period=15
+temps_hysteresis=15
+
+AvVmid_c0=2,140,2,145,2,145,2,145,2,145
+AvVmid_c1=2,140,2,145,2,145,2,145,2,145
+AvVmid_c2=0,0,0,0,0,0,0,0,0,0
+
+rssicorrnorm_c0=3,3
+rssicorrnorm_c1=3,3
+rssicorrnorm5g_c0=1,2,3,1,2,2,0,1,1,1,2,2
+rssicorrnorm5g_c1=1,2,3,0,2,2,1,2,3,3,3,4
+
+swctrlmap_5g=0x00000202,0x05050000,0x04040000,0x000000,0x047
+swctrlmap_2g=0x0000140c,0x28300000,0x08200000,0x803000,0x0ff
+
+cckdigfilttype=1
+
+## 2G TX power compensation in room temp
+powoffs2gtna0=2,1,1,1,1,1,0,0,0,0,1,1,2,0
+powoffs2gtna1=2,2,2,2,2,1,1,0,-1,-1,-1,0,1,0
+
+#BT coex
+btc_mode=1

proprietary/etc/wifi/nvram_net.txt_4339_a0

@@ -0,0 +1,109 @@
+#SS V1 Rev08 with ECO for BCM4339 / AARDVARK01T_REL_6_37_32_10
+sromrev=11
+boardrev=0x1100
+boardtype=0x06b5
+boardflags=0x10401001
+boardflags2=0x0
+boardflags3=0x810c489
+macaddr=00:90:4c:c5:12:38
+ccode=GB
+regrev=6
+antswitch=0
+pdgain5g=1
+pdgain2g=1
+tworangetssi2g=0
+tworangetssi5g=0
+femctrl=4
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+#otpimagesize=502
+xtalfreq=37400
+extpagain2g=1
+pdetrange2g=2
+extpagain5g=1
+pdetrange5g=2
+rxgains2gelnagaina0=3
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=3
+rxgains5gtrisoa0=6
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+agbg0=0
+aga0=0
+tssipos5g=1
+tssipos2g=1
+
+#pa2ga0=0xFF57,0x1512,0xFD70
+#pa2gccka0=0xFF48,0x144D,0xFD7F
+#pa5ga0=0xFF8B,0x1754,0xFD37,0xFFAF,0x183C,0xFD52,0xFF7C,0x17E9,0xFD1F,0xFF6E,0x17B2,0xFD1E
+#pa5gbw40a0=0xFF95,0x178B,0xFD36,0xFF80,0x1727,0xFD3A,0xFF75,0x1750,0xFD3B,0xFF6F,0x174D,0xFD32
+#pa5gbw80a0=0xFFB4,0x17EC,0xFD53,0xFF76,0x171C,0xFD25,0xFF6D,0x1796,0xFD1A,0xFF83,0x1853,0xFD28
+pa2gccka0=0xff43,0x146a,0xfd63
+pa2ga0=0xff4e,0x1494,0xfd72
+pa5ga0=0xffa0,0x164b,0xfd53,0xffc0,0x16c5,0xfd7d,0xff75,0x15e7,0xfd52,0xff7a,0x1721,0xfd2e
+pa5gbw40a0=0xff52,0x1651,0xfcf8,0xffa0,0x16cf,0xfd78,0xff7a,0x16f5,0xfd47,0xffa1,0x194b,0xfd27
+pa5gbw80a0=0xff6c,0x1518,0xfd45,0xff80,0x15fd,0xfd3c,0xff72,0x162f,0xfd3c,0xff3a,0x149f,0xfd45
+
+
+
+
+
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0x88866666
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+mcslr5glpo=0x0000
+mcsbw205glpo=0x88866666
+mcsbw405glpo=0xAAA88888
+mcsbw805glpo=0xCCCAAAAA
+mcslr5gmpo=0x0000
+mcsbw205gmpo=0x88866666
+mcsbw405gmpo=0xAAA88888
+mcsbw805gmpo=0xCCCAAAAA
+mcslr5ghpo=0x0000
+mcsbw205ghpo=0x88866666
+mcsbw405ghpo=0xAAA88888
+mcsbw805ghpo=0xCCCAAAAA
+sb20in40hrrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+#tssifloor5g=220,213,218,228
+#tssifloor2g=245
+cckdigfilttype=2
+##2G Channel pwr compensation (CH12/3/2/1, CH5/4/14/13, CH9/8/7/6, NA/NA/11/10)
+rpcal2g=0x2433
+rpcal5gb0=0x1201
+rpcal5gb1=0x3321
+rpcal5gb2=0x0034
+muxenab=0x10
+##2G RSSI compensation 20/40
+rssicorrnorm_c0=3,3
+##5G RSSI compenation Low(36-48):20/40/80, Mid(54-64):20/40/80, High(100-140):20/40/80, X1(149-165):20/40/80
+rssicorrnorm5g_c0=0,0,0,0,0,0,0,0,0,0,0,0
+
+

proprietary/etc/wifi/nvram_net.txt_4354_a0

@@ -0,0 +1,172 @@
+# Sample variables file for Samsung BCM4354WLBGA iPA, eLNA board with SDIO for production package
+# V1-LTE Rev0.9 - 2014. 01. 05
+NVRAMRev=$Rev: 373428 $
+sromrev=11
+boardrev=0x1101
+boardtype=0x06db
+boardflags=0x12401001
+boardflags2=0x00802000
+boardflags3=0x40000109
+
+macaddr=00:90:4c:16:70:01
+ccode=GB
+regrev=6
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+devid=0x43a3
+#devid=0x43df
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+muxenab=0x10
+xtalfreq=37400
+
+## Rx setting for Ant0
+rxgains2gelnagaina0=3
+rxgains5gelnagaina0=3
+rxgains5gmelnagaina0=3
+rxgains5ghelnagaina0=3
+
+rxgains2gtrelnabypa0=1
+rxgains5gtrelnabypa0=1
+rxgains5gmtrelnabypa0=1
+rxgains5ghtrelnabypa0=1
+
+rxgains2gtrisoa0=5
+rxgains5gtrisoa0=5
+rxgains5gmtrisoa0=5
+rxgains5ghtrisoa0=5
+
+## Rx setting for Ant1
+
+rxgains2gelnagaina1=3
+rxgains5gelnagaina1=3
+rxgains5gmelnagaina1=3
+rxgains5ghelnagaina1=3
+
+rxgains2gtrelnabypa1=1
+rxgains5gtrelnabypa1=1
+rxgains5gmtrelnabypa1=1
+rxgains5ghtrelnabypa1=1
+
+rxgains2gtrisoa1=5
+rxgains5gtrisoa1=5
+rxgains5gmtrisoa1=5
+rxgains5ghtrisoa1=5
+
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+
+## Rev0.9 TSSI Calibration -2013.12.02
+pa2ga0=0xff71,0x154d,0xfd81
+pa2ga1=0xff86,0x175a,0xfd63
+pa5ga0=0xff3e,0x16aa,0xfd35,0xff23,0x13cb,0xfd84,0xff67,0x180d,0xfd36,0xff5f,0x1763,0xfd33
+pa5ga1=0xff29,0x1656,0xfd23,0xff50,0x17e5,0xfd21,0xff35,0x1647,0xfd3d,0xff35,0x167e,0xfd26
+
+## V1-LTE Target Power
+## 2G: 11b-16.5dBm/11g-16/14.5dBm/11n-15/13dBm/11ac-15/12dBm
+## 5G: 11a-16/14dBm/11n-16/13dBm/11ac-16/12dBm
+maxp2ga0=76
+maxp5ga0=76,76,76,76
+maxp2ga1=76
+maxp5ga1=76,76,76,76
+subband5gver=0x4
+pdoffsetcckma0=0x7
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+
+cckbw202gpo=0x1111
+cckbw20ul2gpo=0x0000
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0033
+mcsbw202gpo=0xbb999955
+mcsbw402gpo=0xbb999955
+
+mcsbw205glpo=0xbb977733
+mcsbw405glpo=0xddb99955
+mcsbw805glpo=0xffdbbb77
+
+mcsbw205gmpo=0xbb977733
+mcsbw405gmpo=0xddb99955
+mcsbw805gmpo=0xffdbbb77
+
+
+mcsbw205ghpo=0xbb977733
+mcsbw405ghpo=0xddb99955
+mcsbw805ghpo=0xffdbbb77
+
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+
+#phycal_tempdelta=255
+#changes periodic calibration for the temperature 
+phycal_tempdelta=25
+
+temps_period=15
+temps_hysteresis=15
+
+AvVmid_c0=2,140,2,145,2,145,2,145,2,145
+AvVmid_c1=2,140,2,145,2,145,2,145,2,145
+AvVmid_c2=0,0,0,0,0,0,0,0,0,0
+
+rssicorrnorm_c0=3,3
+rssicorrnorm_c1=3,3
+rssicorrnorm5g_c0=1,2,3,1,2,2,0,1,1,1,2,2
+rssicorrnorm5g_c1=1,2,3,0,2,2,1,2,3,3,3,4
+
+swctrlmap_5g=0x00000202,0x05050000,0x04040000,0x000000,0x047
+swctrlmap_2g=0x0000140c,0x28300000,0x08200000,0x803000,0x0ff
+
+cckdigfilttype=1
+
+## 2G TX power compensation in room temp
+powoffs2gtna0=2,1,1,1,1,1,0,0,0,0,1,1,2,0
+powoffs2gtna1=2,2,2,2,2,1,1,0,-1,-1,-1,0,1,0
+
+#BT coex
+btc_mode=1
+# For Fixing the HID BT coex device problem.
+btc_params84=7000
+btc_params10=20000
+btc_params8=45000

proprietary/etc/wifi/nvram_net.txt_4354_a1

@@ -0,0 +1,172 @@
+# Sample variables file for Samsung BCM4354WLBGA iPA, eLNA board with SDIO for production package
+# V1-LTE Rev0.9 - 2014. 01. 05
+NVRAMRev=$Rev: 373428 $
+sromrev=11
+boardrev=0x1101
+boardtype=0x06db
+boardflags=0x12401001
+boardflags2=0x00802000
+boardflags3=0x48000109
+
+macaddr=00:90:4c:16:70:01
+ccode=GB
+regrev=6
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+#devid=0x43a3
+devid=0x43df
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+muxenab=0x10
+xtalfreq=37400
+
+## Rx setting for Ant0
+rxgains2gelnagaina0=3
+rxgains5gelnagaina0=3
+rxgains5gmelnagaina0=3
+rxgains5ghelnagaina0=3
+
+rxgains2gtrelnabypa0=1
+rxgains5gtrelnabypa0=1
+rxgains5gmtrelnabypa0=1
+rxgains5ghtrelnabypa0=1
+
+rxgains2gtrisoa0=5
+rxgains5gtrisoa0=5
+rxgains5gmtrisoa0=5
+rxgains5ghtrisoa0=5
+
+## Rx setting for Ant1
+
+rxgains2gelnagaina1=3
+rxgains5gelnagaina1=3
+rxgains5gmelnagaina1=3
+rxgains5ghelnagaina1=3
+
+rxgains2gtrelnabypa1=1
+rxgains5gtrelnabypa1=1
+rxgains5gmtrelnabypa1=1
+rxgains5ghtrelnabypa1=1
+
+rxgains2gtrisoa1=5
+rxgains5gtrisoa1=5
+rxgains5gmtrisoa1=5
+rxgains5ghtrisoa1=5
+
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+
+## Rev0.9 TSSI Calibration -2013.12.02
+pa2ga0=0xff71,0x154d,0xfd81
+pa2ga1=0xff86,0x175a,0xfd63
+pa5ga0=0xff3e,0x16aa,0xfd35,0xff23,0x13cb,0xfd84,0xff67,0x180d,0xfd36,0xff5f,0x1763,0xfd33
+pa5ga1=0xff29,0x1656,0xfd23,0xff50,0x17e5,0xfd21,0xff35,0x1647,0xfd3d,0xff35,0x167e,0xfd26
+
+## V1-LTE Target Power
+## 2G: 11b-16.5dBm/11g-16/14.5dBm/11n-15/13dBm/11ac-15/12dBm
+## 5G: 11a-16/14dBm/11n-16/13dBm/11ac-16/12dBm
+maxp2ga0=76
+maxp5ga0=76,76,76,76
+maxp2ga1=76
+maxp5ga1=76,76,76,76
+subband5gver=0x4
+pdoffsetcckma0=0x7
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+
+cckbw202gpo=0x1111
+cckbw20ul2gpo=0x0000
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0033
+mcsbw202gpo=0xbb999955
+mcsbw402gpo=0xbb999955
+
+mcsbw205glpo=0xbb977733
+mcsbw405glpo=0xddb99955
+mcsbw805glpo=0xffdbbb77
+
+mcsbw205gmpo=0xbb977733
+mcsbw405gmpo=0xddb99955
+mcsbw805gmpo=0xffdbbb77
+
+
+mcsbw205ghpo=0xbb977733
+mcsbw405ghpo=0xddb99955
+mcsbw805ghpo=0xffdbbb77
+
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+
+#phycal_tempdelta=255
+#changes periodic calibration for the temperature 
+phycal_tempdelta=25
+
+temps_period=15
+temps_hysteresis=15
+
+AvVmid_c0=2,140,2,145,2,145,2,145,2,145
+AvVmid_c1=2,140,2,145,2,145,2,145,2,145
+AvVmid_c2=0,0,0,0,0,0,0,0,0,0
+
+rssicorrnorm_c0=3,3
+rssicorrnorm_c1=3,3
+rssicorrnorm5g_c0=1,2,3,1,2,2,0,1,1,1,2,2
+rssicorrnorm5g_c1=1,2,3,0,2,2,1,2,3,3,3,4
+
+swctrlmap_5g=0x00000202,0x05050000,0x04040000,0x000000,0x047
+swctrlmap_2g=0x0000140c,0x28300000,0x08200000,0x803020,0x0ff
+
+cckdigfilttype=1
+
+## 2G TX power compensation in room temp
+powoffs2gtna0=2,1,1,1,1,1,0,0,0,0,1,1,2,0
+powoffs2gtna1=2,2,2,2,2,1,1,0,-1,-1,-1,0,1,0
+
+#BT coex
+btc_mode=1
+# For Fixing the HID BT coex device problem.
+btc_params84=7000
+btc_params10=20000
+btc_params8=45000

proprietary/etc/wifi/olsrd.conf

@@ -0,0 +1,491 @@
+#
+# OLSR.org routing daemon config file
+#
+# Lines starting with a # are discarded
+#
+
+# Debug level(0-9)
+# If set to 0 the daemon runs in the background
+
+DebugLevel	1
+
+# IP version to use (4 or 6)
+
+IpVersion	4
+
+# FIBMetric ("flat", "correct", or "approx")
+# Just use "flat", the others don't work very well
+
+FIBMetric "flat"
+
+# Clear the screen each time the internal state changes
+
+ClearScreen     yes
+
+# HNA IPv4 routes
+# syntax: netaddr netmask
+# Example Internet gateway:
+# 0.0.0.0 0.0.0.0
+
+Hna4
+{
+# Internet gateway
+#    0.0.0.0   0.0.0.0
+
+# specific small networks reachable through this node
+#    15.15.0.0 255.255.255.0
+#    15.16.0.0 255.255.255.0
+}
+
+# HNA IPv6 routes
+# syntax: netaddr prefix
+# Example Internet gateway:
+#Hna6
+#{
+# Internet gateway
+#     ::              0
+
+# specific small networks reachable through this node
+#    fec0:2200:106:0:0:0:0:0 48
+#}
+
+# Specify the routing Table olsr uses
+# currently only implemented in linux versions, (bsd planned)
+# useful for policyrouting, to ensure that olsr can use
+# the table a policy rule with priority 65536 is auto-installed
+# by olsrd if an value < 253 ist specified!
+# value defaults to 253 (main table)
+# valid values are 1 .. 254
+# (freifunkfirmware uses 111 for its policy routing)
+
+RtTable 255
+
+#you may specify another table for the default route only
+#if used no policy route will get auto-installed for this table,
+#but the default route gets also inserted into table 254
+#(the last table used in default linux policy routing)
+#valid tables are the same as for RtTable
+
+RtTableDefault 255
+
+# Specify the proto tag to be used for routes olsr inserts into kernel
+# currently only implemented for linux, defaults to 0 which gets replaced
+# by an OS-specific default value under linux 3 (BOOT) gets used as default
+# (for backward compatibility)
+# valid values under linux are 1 .. 254
+# 1 gets remapped by olsrd to 0 UNSPECIFIED (1 is reserved for ICMP redirects)
+# 2 KERNEL routes (not very wise to use)
+# 3 BOOT (should in fact not be used by routing daemons)
+# 4 STATIC
+# 8 .. 15 various routing daemons (gated, zebra, bird, & co)
+
+# RtProto 111
+
+# For testing purposes it may be nice to use another port for olsrd
+# for using another port than the IANA assigned one
+# for a production network, there should be a good reason!!
+# defaults to 698 (IANA assigned olsr-port)
+# valid values are 698 or > 1000
+
+# OlsrPort 698
+
+# Should olsrd keep on running even if there are
+# no interfaces available? This is a good idea
+# for a PCMCIA/USB hotswap environment.
+# "yes" OR "no"
+
+AllowNoInt	yes
+
+# TOS(type of service) value for
+# the IP header of control traffic.
+# If not set it will default to 16
+
+#TosValue	16
+
+# The fixed willingness to use(0-7)
+# If not set willingness will be calculated
+# dynammically based on battery/power status
+
+#Willingness    4
+
+# Allow processes like the GUI front-end
+# to connect to the daemon.
+
+IpcConnect
+{
+     # Determines how many simultaneously
+     # IPC connections that will be allowed
+     # Setting this to 0 disables IPC
+
+     MaxConnections  0
+
+     # By default only 127.0.0.1 is allowed
+     # to connect. Here allowed hosts can
+     # be added
+
+     Host            127.0.0.1
+     # Host            10.0.0.5
+
+     # Specify entire net-ranges that are
+     # allowed to connect
+
+     # Net             192.168.1.0 255.255.255.0
+}
+
+# Link quality level
+# 0 = do not use link quality
+# 1 = use link quality for MPR selection
+# 2 = use link quality for MPR selection and routing
+# Defaults to 2
+
+#LinkQualityLevel	2
+
+# Link quality algorithm (only for lq level 1 or 2)
+# Defaults to "etx_ff" for fixpoint based etx algorithm
+
+LinkQualityAlgorithm    "ett_ss"
+
+# Link quality aging factor
+# Defaults to 0.05, smaller values mean larger LQ window size
+# Link quality aging does only apply to lq level 1 and 2
+
+LinkQualityAging 0.05
+
+# Fisheye mechanism for TC messages 0=off, 1=on
+# default is 1
+
+LinkQualityFishEye	0
+
+# Wether to use hysteresis or not
+# Hysteresis adds more robustness to the
+# link sensing but delays neighbor registration.
+# Used by default. 'yes' or 'no'
+
+UseHysteresis	no
+
+# Hysteresis parameters
+# Do not alter these unless you know
+# what you are doing!
+# Set to auto by default. Allowed
+# values are floating point values
+# in the interval 0,1
+# THR_LOW must always be lower than
+# THR_HIGH!!
+
+#HystScaling	0.50
+#HystThrHigh	0.80
+#HystThrLow	0.30
+
+
+# Polling rate in seconds(float).
+# Default value 0.05 sec
+
+Pollrate	0.05
+
+# Interval to poll network interfaces for configuration
+# changes. Defaults to 2.5 seconds
+
+NicChgsPollInt  2.0
+
+
+# TC redundancy
+# Specifies how much neighbor info should
+# be sent in TC messages
+# Possible values are:
+# 0 - only send MPR selectors
+# 1 - send MPR selectors and MPRs
+# 2 - send all neighbors
+#
+# defaults to 0
+
+TcRedundancy	2
+
+#
+# NatThreshold
+#
+# (currently this is only in the freifunk firmware)
+# If the NAT-Endpoint (the preferred 0/0 HNA
+# emitting node) is to be changed, the ETX value of the current 0/0 is
+# compared to the new one. If the ETX difference is too small, the default
+# route isn't changed. defaults to 1.0
+# The configured route gets multiplied by the threshold,
+# before comparing which route is better
+
+# NatThreshold  0.9
+
+#
+# MPR coverage
+# Specifies how many MPRs a node should
+# try select to reach every 2 hop neighbor
+#
+# Can be set to any integer >0
+#
+# defaults to 1
+
+MprCoverage	3
+
+
+# Olsrd plugins to load
+# This must be the absolute path to the file
+# or the loader will use the following scheme:
+# - Try the paths in the LD_LIBRARY_PATH
+#   environment variable.
+# - The list of libraries cached in /etc/ld.so.cache
+# - /lib, followed by /usr/lib
+#
+# the examples in this list are for linux, so check if the plugin is
+# available if you use windows/BSD.
+
+# LoadPlugin "olsrd_httpinfo.dll"
+# LoadPlugin "/system/lib/olsrd_httpinfo.so.0.1"
+#{
+    # port number the httpinfo plugin will be listening, default 1978
+#   PlParam     "port"   "8000"
+
+    # ip address that can access the plugin, use "0.0.0.0"
+    # to allow everyone
+#   PlParam     "Host"   "127.0.0.1"
+#   PlParam     "Host"   "80.23.53.22"
+
+    # networks that can access the plugin (ip/netmask)
+    # careful with 0.0.0.0/0, makes (ddos) attacks poss.
+#   PlParam     "Net"    "0.0.0.0 0.0.0.0"
+#   PlParam     "Net"    "104.0.0.0 255.255.0.0"
+#   PlParam     "Net"    "192.168.0.0 255.255.0.0"
+#
+
+# LoadPlugin "olsrd_txtinfo.dll"
+#LoadPlugin "/system/lib/olsrd_txtinfo.so.0.1"
+#{
+    # port number the txtinfo plugin will be listening, default 2006
+#   PlParam     "port"   "81"
+    # ip address that can access the plugin, use "0.0.0.0"
+    # to allow everyone
+#    PlParam     "Accept"   "127.0.0.1"
+#}
+
+#LoadPlugin "olsrd_secure.so.0.3"
+#{
+    # define source of keyfile for secure plugin
+    # see lib/secure/README_SECURE for more information
+
+#   PlParam     "Keyfile"   "/etc/olsr-keyfile.txt"
+#}
+
+#LoadPlugin "olsrd_dyn_gw.so.0.1"
+#{
+    # Here parameters are set to be sent to the
+    # plugin. Theese are on the form "key" "value".
+    # Parameters ofcause, differs from plugin to plugin.
+    # Consult the documentation of your plugin for details.
+
+    # Example: dyn_gw params
+
+    # how often to check for Internet connectivity
+    # defaults to 5 secs
+#   PlParam     "Interval"   "40"
+
+    # if one or more IPv4 addresses are given, do a ping on these in
+    # descending order to validate that there is not only an entry in
+    # routing table, but also a real internet connection. If any of
+    # these addresses could be pinged successfully, the test was
+    # succesful, i.e. if the ping on the 1st address was successful,the
+    # 2nd won't be pinged
+#   PlParam     "Ping"       "141.1.1.1"
+#   PlParam     "Ping"       "194.25.2.129"
+#}
+
+# olsrd_dyn_gw_plain.so.0.4
+# {
+# }
+
+
+# Interfaces and their rules
+# Omitted options will be set to the
+# default values.
+# multiple interfaces can be speicified
+Interface "wlan0"
+{
+
+    # IPv4 broadcast address to use. The
+    # one usefull example would be 255.255.255.255
+    # If not defined the broadcastaddress
+    # every card is configured with is used
+    # The second useful value would be to
+    # specify the peer adress of an ptp-tunnel
+
+    # Ip4Broadcast      255.255.255.255
+
+    # Interface Mode is used to prevent unnecessary
+    # packet forwarding on switched ethernet interfaces
+    # valid Modes are "mesh" and "ether"
+    # The default value is mesh!
+
+    # Mode "mesh"
+
+    # IPv6 address scope to use.
+    # Must be 'site-local' or 'global'
+
+    # Ip6AddrType		site-local
+
+    # IPv6 multicast address to use when
+    # using site-local addresses.
+    # If not defined, ff05::15 is used
+
+    # Ip6MulticastSite	ff05::11
+
+    # IPv6 multicast address to use when
+    # using global addresses
+    # If not defined, ff0e::1 is used
+
+    # Ip6MulticastGlobal	ff0e::1
+
+
+    # Emission intervals.
+    # If not defined, RFC proposed values will
+    # be used in most cases.
+
+    # Hello interval in seconds(float)
+    HelloInterval    1.0
+
+    # HELLO validity time
+    HelloValidityTime	10.0
+
+    # TC interval in seconds(float)
+    TcInterval        1.0
+
+    # TC validity time
+    TcValidityTime	20.0
+
+    # MID interval in seconds(float)
+    # MidInterval	5.0
+
+    # MID validity time
+    # MidValidityTime	30.0
+
+    # HNA interval in seconds(float)
+    # HnaInterval	5.0
+
+    # HNA validity time
+    # HnaValidityTime    30.0
+
+    # When multiple links exist between hosts
+    # the weight of interface is used to determine
+    # the link to use. Normally the weight is
+    # automatically calculated by olsrd based
+    # on the characteristics of the interface,
+    # but here you can specify a fixed value.
+    # Olsrd will choose links with the lowest value.
+    # Note:
+    # Interface weight is used only when LinkQualityLevel is set to 0.
+    # For any other value of LinkQualityLevel, the interface ETX
+    # value is used instead.
+    # Weight 0
+
+
+    # If a certain route should be preferred
+    # or ignored by the mesh, the Link Quality
+    # value of a node can be multiplied with a factor
+    # entered here. In the example the route
+    # using 192.168.0.1 would rather be ignored.
+    # A multiplier of 0.5 will result in a small
+    # (bad) LinkQuality value and a high (bad)
+    # ETX value.
+    # Note:
+    # Link quality multiplier is used only when
+    # LinkQualityLevel is > 0.
+
+    # LinkQualityMult 192.168.0.1 0.5
+
+    # This multiplier applies to all other nodes
+    # LinkQualityMult default 0.8
+}
+
+# another Interface (with different configs)
+#Interface "eth1"
+#{
+    # IPv4 broadcast address to use.
+    # One usefull example would be 255.255.255.255
+    # If not defined the broadcastaddress of
+    # every interface which has one configured gets used
+    # The second useful value would be to
+    # specify the peer adress of an ptp-tunnel
+
+#    Ip4Broadcast	192.168.255.255
+
+    # Interface Mode is used to prevent unnecessary
+    # packet forwardin on switched ethernet interfaces
+    # valid Modes are "mesh" and "ether"
+    # The default value is mesh!
+
+#    Mode "ether"
+#}
+
+#LoadPlugin "olsrd_bmf.so.1.7.0"
+#{
+    # Specify the name of the BMF network interface.
+    # Defaults to "bmf0".
+    #PlParam "BmfInterface" "bmf0"
+
+    # Specify the IP address and mask for the BMF network interface.
+    # By default, the IP address of the first OLSR interface is copied.
+    # The default prefix length is 32.
+    #PlParam "BmfInterfaceIp" "10.10.10.234/24"
+
+    # Enable or disable marking the BMF network interface as persistent.
+    # When the interface is persistent (default) then it will not be removed
+    # when olsrd shuts down. This is to facilitate other programs (for example
+    # multicast routing daemon mrouted) to continue using it.
+    #PlParam "BmfInterfacePersistent" "yes"
+
+    # Enable or disable the flooding of local broadcast packets
+    # (e.g. packets with IP destination 192.168.1.255). Either "yes"
+    # or "no". Defaults to "yes".
+    # Note: all nodes in the same network should have the same setting for
+    # this plugin parameter.
+    #PlParam "DoLocalBroadcast" "yes"
+
+    # Enable or disable the capturing packets on the OLSR-enabled
+    # interfaces (in promiscuous mode). Either "yes" or "no". Defaults
+    # to "no".
+    # The multicast (and, if configured, local broadcast) packets sent on
+    # the non-OLSR network interfaces and on the BMF network interface will
+    # always be flooded over the OLSR network.
+    # If this parameter is "yes", also the packets sent on the OLSR-enabled
+    # network interfaces will be flooded over the OLSR network.
+    # NOTE: This parameter should be set consistently on all hosts throughout
+    # the network. If not, hosts may receive multicast packets in duplicate.
+    #PlParam "CapturePacketsOnOlsrInterfaces" "yes"
+
+    # The forwarding mechanism to use. Either "Broadcast" or
+    # "UnicastPromiscuous". Defaults to "Broadcast".
+    # In the "UnicastPromiscuous" mode, packets are forwarded (unicast) to the
+    # best candidate neighbor; other neighbors listen promiscuously. IP-local
+    # broadcast is not used. This saves air time on 802.11 WLAN networks,
+    # on which unicast packets are usually sent at a much higher bit rate
+    # than broadcast packets (which are sent at a basic bit rate).
+    # Note: all nodes in the same network should have the same setting for
+    # this plugin parameter.
+    #PlParam "BmfMechanism" "Broadcast"
+
+    # The number of times BMF will transmit the same packet whenever it decides
+    # to use broadcast to forward a packet. Defaults to 1. Not used if
+    # "BmfMechanism" is set to "UnicastPromiscuous".
+    #PlParam "BroadcastRetransmitCount" "1"
+
+    # If the number of neighbors to forward to is less than or equal to the
+    # FanOutLimit, then packets to be relayed will be sent via unicast.
+    # If the number is greater than the FanOutLimit the packet goes out
+    # as broadcast. Legal values are 0...10. See MAX_UNICAST_NEIGHBORS
+    # as defined in NetworkInterfaces.h . 0 means broadcast is always used,
+    # even if there is only 1 neighbor to forward to. Defaults to 2.
+    # This plugin parameter is not used if "BmfMechanism" is set to
+    # "UnicastPromiscuous".
+    #PlParam "FanOutLimit" "0"
+
+    # List of non-OLSR interfaces to include
+    #PlParam     "NonOlsrIf"  "eth2"
+    #PlParam     "NonOlsrIf"  "eth3"
+#}
+
+LockFile "/data/local/olsrd.lock"

proprietary/etc/wifi/p2p_supplicant_overlay.conf

@@ -0,0 +1,14 @@
+disable_scan_offload=1
+p2p_listen_reg_class=81
+p2p_listen_channel=1
+p2p_oper_reg_class=124
+p2p_oper_channel=149
+manufacturer=SAMSUNG_ELECTRONICS
+model_name=SAMSUNG_MOBILE
+model_number=2014
+serial_number=19691101
+update_config=1
+ip_addr_go=192.168.49.1
+ip_addr_mask=255.255.255.0
+ip_addr_start=192.168.49.200
+ip_addr_end=192.168.49.254

proprietary/etc/wifi/wpa_supplicant.conf

@@ -0,0 +1,4 @@
+update_config=1
+eapol_version=1
+ap_scan=1
+fast_reauth=1

proprietary/etc/wifi/wpa_supplicant_overlay.conf

@@ -0,0 +1,4 @@
+p2p_disabled=1
+autoscan=samsung_exponential:8:128
+update_config=1
+pmf=1