399e9af90a
* XTRA_SERVERs are important, right? Like to get the almanac data necessary for aGPS. Without the XTRA download, the chip needs to collect sufficient navigation messages from the birds to compute where they are in order to make sense of the ranging signals. * Well, it seems that O doesn't like reading these entries from the gps.conf file. When in gps.conf: GpsXtraDownloader: No XTRA servers were specified in the GPS configuration When in overlay: <that noise doesn't exist> * This seems to, finally, return GPS fix performance to what we had in N. Change-Id: I70679835ec5dea053c5aa3750acee628906d6390
119 lines
3.2 KiB
Plaintext
119 lines
3.2 KiB
Plaintext
#XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
|
|
#XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
|
|
#XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
|
|
|
|
#Version check for XTRA
|
|
#DISABLE = 0
|
|
#AUTO = 1
|
|
#XTRA2 = 2
|
|
#XTRA3 = 3
|
|
XTRA_VERSION_CHECK=1
|
|
|
|
# Error Estimate
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
#Test
|
|
# NTP_SERVER=time.izatcloud.net
|
|
#Asia
|
|
# NTP_SERVER=asia.pool.ntp.org
|
|
#Europe
|
|
# NTP_SERVER=europe.pool.ntp.org
|
|
#North America
|
|
#NTP_SERVER=north-america.pool.ntp.org
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 2
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
INTERMEDIATE_POS=0
|
|
|
|
# Below bit mask configures how GPS functionalities
|
|
# should be locked when user turns off GPS on Settings
|
|
# Set bit 0x1 if MO GPS functionalities are to be locked
|
|
# Set bit 0x2 if NI GPS functionalities are to be locked
|
|
# default - non is locked for backward compatibility
|
|
#GPS_LOCK = 0
|
|
|
|
# supl version 2.0
|
|
SUPL_VER=0x20000
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
#SUPL_ES=0
|
|
# Sensor R&D : Non-SUPL ES should be default
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
#1 - Use emergency PDN
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
|
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
|
#If it is uncommented here, this value will over write the value from
|
|
#config.xml.
|
|
#MSA=0X2
|
|
#MSB=0X1
|
|
#Sensor R&D : Change default bit mask
|
|
#SUPL_MODE=1
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
|
CAPABILITIES=0x31
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
#SUPL_HOST=supl.google.com
|
|
#SUPL_PORT=7275
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
# C2K_PORT=1234
|
|
|
|
# Bitmask of slots that are available
|
|
# for write/install to, where 1s indicate writable,
|
|
# and the default value is 0 where no slots
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
# of b1000001010 makes 3 slots available
|
|
# and the remaining 7 slots unwritable.
|
|
#AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
####################################
|
|
# LTE Positioning Profile Settings
|
|
####################################
|
|
# 0: Enable RRLP on LTE(Default)
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
# 2: Enable LPP_Control_Plane
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
#LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
NMEA_PROVIDER=1
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
SGLTE_TARGET=0
|
|
|
|
##################################################
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
##################################################
|
|
# 0x1: RRC CPlane
|
|
# 0x2: RRLP UPlane
|
|
# 0x4: LLP Uplane
|
|
# Sensor R&D : This will not be injected to MODEM
|
|
A_GLONASS_POS_PROTOCOL_SELECT = 0
|