eb088711d4
* Even though the stock gps_debug.conf says that you put
customization in fw/b overlays, Q doesn't look to those anymore.
* With XTRA_SERVERs in those overlays you get:
GpsPsdsDownloader: No PSDS servers were specified in the GPS configuration
This reverts commit 399e9af90a.
Change-Id: Id392cf4a9b91a63a4400e546bc9ba4c32b656ef4
113 lines
3.1 KiB
Plaintext
113 lines
3.1 KiB
Plaintext
XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
|
|
XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
|
|
XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
|
|
|
|
#Version check for XTRA
|
|
#DISABLE = 0
|
|
#AUTO = 1
|
|
#XTRA2 = 2
|
|
#XTRA3 = 3
|
|
XTRA_VERSION_CHECK=1
|
|
|
|
# Error Estimate
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
# Worldwide
|
|
NTP_SERVER=1.android.pool.ntp.org
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 2
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
INTERMEDIATE_POS=0
|
|
|
|
# Below bit mask configures how GPS functionalities
|
|
# should be locked when user turns off GPS on Settings
|
|
# Set bit 0x1 if MO GPS functionalities are to be locked
|
|
# Set bit 0x2 if NI GPS functionalities are to be locked
|
|
# default - non is locked for backward compatibility
|
|
#GPS_LOCK = 0
|
|
|
|
# supl version 2.0
|
|
SUPL_VER=0x20000
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
#SUPL_ES=0
|
|
# Sensor R&D : Non-SUPL ES should be default
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
#1 - Use emergency PDN
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
|
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
|
#If it is uncommented here, this value will over write the value from
|
|
#config.xml.
|
|
#MSA=0X2
|
|
#MSB=0X1
|
|
#Sensor R&D : Change default bit mask
|
|
#SUPL_MODE=1
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
|
|
CAPABILITIES=0x31
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
#SUPL_HOST=supl.google.com
|
|
#SUPL_PORT=7275
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
# C2K_PORT=1234
|
|
|
|
# Bitmask of slots that are available
|
|
# for write/install to, where 1s indicate writable,
|
|
# and the default value is 0 where no slots
|
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
|
# of b1000001010 makes 3 slots available
|
|
# and the remaining 7 slots unwritable.
|
|
#AGPS_CERT_WRITABLE_MASK=0
|
|
|
|
####################################
|
|
# LTE Positioning Profile Settings
|
|
####################################
|
|
# 0: Enable RRLP on LTE(Default)
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
# 2: Enable LPP_Control_Plane
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
#LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
NMEA_PROVIDER=1
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
SGLTE_TARGET=0
|
|
|
|
##################################################
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
##################################################
|
|
# 0x1: RRC CPlane
|
|
# 0x2: RRLP UPlane
|
|
# 0x4: LLP Uplane
|
|
# Sensor R&D : This will not be injected to MODEM
|
|
A_GLONASS_POS_PROTOCOL_SELECT = 0
|