msm8974-common: gps: Import configs from klte-common

Change-Id: I92fbf38ecac658fa69191b89890b79e82e05acec

gps/etc/flp.conf

@@ -0,0 +1,60 @@
+###################################
+#####       FLP settings      #####
+###################################
+
+###################################
+# FLP BATCHING SIZE
+###################################
+# The number of batched locations
+# requested to modem. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# batch size defined as 20 as below.
+BATCH_SIZE=20
+
+###################################
+# FLP BATCHING SESSION TIMEOUT
+###################################
+# Duration with which batch session timeout
+# happens in milliseconds. If not specified
+# or set to zero, batching session timeout
+# defaults to 20 seconds by the modem.
+# BATCH_SESSION_TIMEOUT=20000
+
+###################################
+# FLP CAPABILITIES BIT MASK
+###################################
+# GEOFENCE = 0x01
+# BATCHING = 0x02
+# default = GEOFENCE | BATCHING
+CAPABILITIES=0x00
+
+###################################
+# FLP BATCHING ACCURACY
+###################################
+# Set to one of the defined values below
+# to define the accuracy of batching.
+# If not specified, accuracy defaults
+# to LOW.
+# FLP BATCHING ACCURACY values:
+# Low accuracy = 0
+# Medium accuracy = 1
+# High accuracy = 2
+ACCURACY=0
+
+###################################
+# FLP GEOFENCE RESPONSIVENESS
+###################################
+# If set to one of the defined values below,
+# it will override the responsiveness for
+# FLP geofence, which implements the fused
+# location API. If not set to a value defined
+# below, which is default, it will not
+# override the responsivness.
+# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0

gps/etc/gps.conf

@@ -1,15 +1,13 @@
-#Uncommenting these urls would only enable
+XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
-#the power up auto injection and force injection(test case).
+XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
-#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
+XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
-#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
-#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
 
 #Version check for XTRA
 #DISABLE = 0
 #AUTO    = 1
 #XTRA2   = 2
 #XTRA3   = 3
-XTRA_VERSION_CHECK=0
+XTRA_VERSION_CHECK=1
 
 # Error Estimate
 # _SET = 1
@@ -17,7 +15,7 @@ XTRA_VERSION_CHECK=0
 ERR_ESTIMATE=0
 
 #Test
-NTP_SERVER=time.gpsonextra.net
+# NTP_SERVER=time.izatcloud.net
 #Asia
 # NTP_SERVER=asia.pool.ntp.org
 #Europe
@@ -28,7 +26,7 @@ NTP_SERVER=time.gpsonextra.net
 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
 #               4 - Debug, 5 - Verbose
 # If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 3
+DEBUG_LEVEL = 2
 
 # Intermediate position report, 1=enable, 0=disable
 INTERMEDIATE_POS=0
@@ -40,11 +38,12 @@ INTERMEDIATE_POS=0
 # default - non is locked for backward compatibility
 #GPS_LOCK = 0
 
-# supl version 1.0
+# supl version 2.0
-SUPL_VER=0x10000
+SUPL_VER=0x20000
 
 # Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=0
+#SUPL_ES=0
+# Sensor R&D : Non-SUPL ES should be default
 
 #Choose PDN for Emergency SUPL
 #1 - Use emergency PDN
@@ -56,7 +55,8 @@ USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
 #config.xml.
 #MSA=0X2
 #MSB=0X1
-#SUPL_MODE=
+#Sensor R&D : Change default bit mask
+#SUPL_MODE=1
 
 # GPS Capabilities bit mask
 # SCHEDULING = 0x01
@@ -65,7 +65,7 @@ USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
 # ON_DEMAND_TIME = 0x10
 # GEOFENCE = 0x20
 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x37
+CAPABILITIES=0x31
 
 # Accuracy threshold for intermediate positions
 # less accurate positions are ignored, 0 for passing all positions
@@ -76,8 +76,8 @@ CAPABILITIES=0x37
 ################################
 
 # FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
+#SUPL_HOST=supl.google.com
-# SUPL_PORT=1234
+#SUPL_PORT=7275
 
 # FOR C2K PDE SUPPORT, set the following
 # C2K_HOST=c2k.pde.com or IP
@@ -98,13 +98,13 @@ CAPABILITIES=0x37
 # 1: Enable LPP_User_Plane on LTE
 # 2: Enable LPP_Control_Plane
 # 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 2
+#LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM
 
 ################################
 # EXTRA SETTINGS
 ################################
 # NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=0
+NMEA_PROVIDER=1
 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
 SGLTE_TARGET=0
 
@@ -114,4 +114,5 @@ SGLTE_TARGET=0
 # 0x1: RRC CPlane
 # 0x2: RRLP UPlane
 # 0x4: LLP Uplane
+# Sensor R&D : This will not be injected to MODEM
 A_GLONASS_POS_PROTOCOL_SELECT = 0

gps/etc/izat.conf

@@ -0,0 +1,196 @@
+#########################################
+# Log verbosity control for izat modules
+#########################################
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
+IZAT_DEBUG_LEVEL = 2
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+################################
+# NLP Settings
+################################
+# NLP_MODE  1: GNP Only, 2: QNP Only, 3: Combo
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
+# whether or not to still send network location requests to
+# QNP when the EULA is not consented to by the user. QNP can
+# still return ZPP locations or injected locations even
+# without EULA consent, but the uncertainty can be high.
+NLP_MODE = 1
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 0
+
+# Threshold period for ZPP triggers
+ZPP_TRIGGER_THRESHOLD=60000
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_CELL_PROC valid options:
+# AP
+# MODEM
+GTP_CELL_PROC=MODEM
+
+#GTP_CELL valid modes:
+# DISABLED
+# BASIC
+GTP_CELL=BASIC
+
+#GTP_WIFI valid modes:
+# DISABLED
+# BASIC
+GTP_WIFI=BASIC
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+SAP=BASIC
+
+#ODCPI valid modes:
+#DISABLED
+#BASIC
+ODCPI=DISABLED
+
+#FREE_WIFI_SCAN_INJECT valid modes:
+#DISABLED
+#BASIC
+FREE_WIFI_SCAN_INJECT=BASIC
+
+#SUPL_WIFI valid modes:
+#DISABLED
+#BASIC
+SUPL_WIFI=DISABLED
+
+#WIFI_SUPPLICANT_INFO valid modes:
+#DISABLED
+#BASIC
+WIFI_SUPPLICANT_INFO=BASIC
+
+#####################################
+# Location process launcher settings
+#####################################
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#FEATURE MASKS:
+# GTP-WIFI    0X03
+# GTP-AP-CELL 0X0c
+# GTP-MP-CELL 0xc00
+# GTP-WAA     0X300
+# SAP         0Xc0
+# ODCPI      0x1000
+# FREE_WIFI_SCAN_INJECT   0x2000
+# SUPL_WIFI   0x4000
+# WIFI_SUPPLICANT_INFO   0x8000
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. all -> for All platforms
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. all -> for all basebands
+
+#Valyes for LEAN_TARGETS can be:
+#ENABLED  -> if this process is supposed to run on lean and mean targets
+#DISABLED -> if this process is to be disabled on lean and mean targets
+PROCESS_NAME=/system/bin/garden_app
+PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=auto
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/gpsone_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=inet net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=msm7630_fusion
+BASEBAND=svlte2a sglte sglte2
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_admin wifi inet oem_2950 net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0xf303
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xc0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=net_admin wifi inet gps net_raw oem_2952
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/vendor/bin/slim_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw oem_2950
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED

gps/etc/sap.conf

@@ -0,0 +1,53 @@
+################################
+# Sensor Settings
+################################
+#The following parameters are optional.
+#Internal defaults support MEMS sensors
+#native to most handset devices.
+#Device specific sensor characterization
+#for improved performance is possible as
+#described in SAP application notes.
+#GYRO_BIAS_RANDOM_WALK=
+#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
+#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
+#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
+#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
+
+# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
+# used in loc_eng_reinit
+SENSOR_ACCEL_BATCHES_PER_SEC=2
+SENSOR_ACCEL_SAMPLES_PER_BATCH=5
+SENSOR_GYRO_BATCHES_PER_SEC=2
+SENSOR_GYRO_SAMPLES_PER_BATCH=5
+# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
+SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
+SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
+SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
+SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
+
+# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
+# used in loc_eng_reinit
+SENSOR_CONTROL_MODE=0
+
+# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
+# used in loc_eng_reinit
+SENSOR_USAGE=0
+
+# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK)
+SENSOR_PROVIDER=2
+
+# Bit mask used to define which sensor algorithms are used.
+# Setting each bit has the following definition:
+#  0x1 - DISABLE_INS_POSITIONING_FILTER
+#  0x0 - ENABLE_INS_POSITIONING_FILTER
+SENSOR_ALGORITHM_CONFIG_MASK=0x0
+
+# Time source used by Sensor HAL
+# Setting this value controls accuracy of location sensor services.
+#  0 - Unknown
+#  1 - CLOCK_BOOTTIME
+#  2 - CLOCK_MONOTONIC
+#  3 - CLOCK_REALTIME
+#  4 - CLOCK_BOOTTIME using Alarm timer interface
+NDK_PROVIDER_TIME_SOURCE=1
+