android_device_samsung_mondrianwifi/device.mk

#
# Copyright (C) 2014-2016 The CyanogenMod Project
# Copyright (C) 2017-2018 The LineageOS Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)

# Get non-open-source specific aspects
$(call inherit-product-if-exists, vendor/samsung/mondrianwifi/mondrianwifi-vendor.mk)

# We are a tablet, not a phone
PRODUCT_CHARACTERISTICS := tablet

# Overlays
DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay

# Device uses high-density artwork where available
PRODUCT_AAPT_CONFIG := normal
PRODUCT_AAPT_PREF_CONFIG := xhdpi

# Boot animation
TARGET_SCREEN_WIDTH := 2560
TARGET_SCREEN_HEIGHT := 1600
TARGET_BOOTANIMATION_HALF_RES := true

# Audio
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/audio/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.conf \
    $(LOCAL_PATH)/audio/audio_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info.xml \
    $(LOCAL_PATH)/audio/audio_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy.conf \
    $(LOCAL_PATH)/audio/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml

# Camera
PRODUCT_PACKAGES += \
    libshim_camera

# Doze
PRODUCT_PACKAGES += \
    SamsungDoze

# FlipFlap
PRODUCT_PACKAGES += \
    FlipFlap

# IPv6 tethering
PRODUCT_PACKAGES += \
    ebtables \
    ethertypes

# Input device
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/idc/sec_e-pen.idc:system/usr/idc/sec_e-pen.idc

# Keylayouts
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/keylayout/atmel_mxt_ts.kl:system/usr/keylayout/atmel_mxt_ts.kl \
    $(LOCAL_PATH)/keylayout/Button_Jack.kl:system/usr/keylayout/Button_Jack.kl \
    $(LOCAL_PATH)/keylayout/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \
    $(LOCAL_PATH)/keylayout/philips_remote_ir.kl:system/usr/keylayout/philips_remote_ir.kl \
    $(LOCAL_PATH)/keylayout/samsung_remote_ir.kl:system/usr/keylayout/samsung_remote_ir.kl \
    $(LOCAL_PATH)/keylayout/sec_touchscreen.kl:system/usr/keylayout/sec_touchscreen.kl \
    $(LOCAL_PATH)/keylayout/ue_rf4ce_remote.kl:system/usr/keylayout/ue_rf4ce_remote.kl

# Lights
PRODUCT_PACKAGES += \
    android.hardware.light@2.0-impl \
    lights.MSM8974

# Media
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/configs/media_profiles.xml:system/etc/media_profiles.xml \
    $(LOCAL_PATH)/configs/media_codecs_performance.xml:system/etc/media_codecs_performance.xml

# Permissions
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \
    frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \
    frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \
    frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
    frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

# Radio
PRODUCT_PACKAGES += \
    libsecnativefeature

# Ramdisk
PRODUCT_PACKAGES += \
    fstab.qcom \
    init.qcom.rc \
    init.qcom.usb.rc \
    ueventd.qcom.rc \
    init.qcom.bt.sh \
    init.input.sh

# Thermal
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/configs/thermal-engine-8974.conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-8974.conf

# Vibrator
PRODUCT_PACKAGES += \
    android.hardware.vibrator@1.0-impl

# Vendor properties
-include $(LOCAL_PATH)/system_prop.mk

# Wifi
PRODUCT_PACKAGES += \
    hostapd_default.conf \
    libwcnss_qmi \
    libwpa_client \
    wcnss_service

PRODUCT_COPY_FILES += \
   $(LOCAL_PATH)/configs/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
   $(LOCAL_PATH)/configs/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf

PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/prima/WCNSS_qcom_cfg.ini \
    $(LOCAL_PATH)/wifi/WCNSS_cfg.dat:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/prima/WCNSS_cfg.dat \
    $(LOCAL_PATH)/wifi/WCNSS_qcom_wlan_nv.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin

# sensors
PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/configs/sensor_def_qcomdev.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensor_def_qcomdev.conf

# ADB
PRODUCT_SYSTEM_DEFAULT_PROPERTIES += \
    persist.sys.usb.config=adb \
    ro.adb.secure=0 \
    ro.secure=0

# Root
PRODUCT_PACKAGES += \
    su

# common msm8974
$(call inherit-product, device/samsung/msm8974-common/msm8974.mk)